Alive Email - Procentec ComBricks User Manual

Table 2 - Email server parameters
Server parameters Mandatory
Groups 1 - 4 At least one
group
Cc Optional
From Yes
Subject Optional
SMTP server Yes
SMTP server port Yes
User name Optional
Password Optional
When you have filled in all server parameters, click on "Save". The settings can be tested by clicking on "Send
test email with saved settings".

Save the settings first before sending the test email!
It might take a couple of minutes before the test email has been received by the recipient.
If the test-email has not been received, please check if it has been blocked by a Spam filter.

4.11.1 Alive email

ComBricks can send a periodic alive-email to the recipient group(s) entered in the Group: field. If no events are
triggered for a longer period, ComBricks will not send emails. This also happens when ComBricks has no
connection to the mail server for some reason. The alive email is an automated check to see that the
connection is still active.
ComBricks can auto-send an email with adjustable interval of anything between one hour and 365 days.
ComBricks User Manual v6.4.0 | January 18| © PROCENTEC
Additional information
If you enter multiple addresses (max. 3)
separate them with the ; character.
If you enter multiple addresses (max. 3)
separate them with the ; character.
Depending on the email server you are using,
this has to be an existing email address.
Can be anything you want it to be.
Has to be setup according to the requirements
of the email server.
Standard value for most servers has already
been entered, but has to be setup according to
the requirements of the email server.
A User name can be entered if the SMTP server
requires it. Click on "SMTP-Username and
password" first.
A password can be entered if the SMTP server
requires it. Click on "SMTP-Username and
password" first.
Size
200
200
100
100
100
50
50
56/219