Updating Modules - Procentec ComBricks User Manual

Profibus data hub for repeaters and fiber optics modules

Table of Contents

17.2 Updating modules

Some ComBricks modules can get new functionality by updating the module firmware. These updates are not

distributed through the Head Station firmware, but in separate Module firmware packages. For a listing of all

available firmware, see www.procentec.com/ComBricks.

The tool for updating the module firmware is different than the tool for updating the Head Station. It can be

downloaded from the above mentioned location.

After downloading the update tool and the module firmware follow the procedure below:

STEP 1:

Make sure the Head Station and targeted module(s) are powered and running.

STEP 2:

Connect an Ethernet cable between the Head Station and your workstation and verify the

network connection.

STEP 3:

Start the Module firmware update tool and enter the IP address of the targeted ComBricks

Head Station. If you do not know the IP address, use 'Search network' to open the Discovery

Tool and select the correct Head Station.

STEP 4:

Click 'Connect to Head station' in the Update tool. It will scan all slots to check the module

types.

STEP 5:

Double-click the targeted module slot. A file dialog will appear; navigate to the local folder

where you stored the firmware package.

STEP 6:

The tool automatically filters all unrelated firmware files; you cannot select incorrect files.

Choose the firmware and click 'Open'. The firmware update will start automatically. You

should see the windows as shown in Fig. 114 and Fig. 113.

Fig. 114 - Updating module

Use the Discovery Tool if you

do not know the IP address

Double-click a

module to select a

firmware file

Fig. 113 - Update complete

158/219

Table of Contents