Table of Contents
Advertisement
10.4 LEDs
The table below explains the function of all the LEDs on the front plate of the Fiber Optic module:
RDY
Module has NOT been
powered / initialized yet.
RX1 / RX2
NO signal, or NO valid
telegrams detected on this
channel, or channel is off.
LV1 / LV2
Signal quality is good,
or channel is off.
ER1 / ER2
No errors, or channel
is off.
10.5 Setting up Fiber Optic alarms
The webserver and the FO Ring module are capable of sending alarms on critical events in the fiber connection.
The following events can be reported:
•
Signal quality deterioration and quality improvement
•
Ring failing and ring established
On the module status page all vital module information is displayed. You can see the detected baudrate, and
channel 1 and 2 signal status. Also the ring status is displayed.
ComBricks User Manual v6.4.0 | January 18| © PROCENTEC
OFF
Head Station is
initializing or updating the
module.
1 or more devices are
communicating on this
channel.
Not possible
Not possible
Blinking
Module has been
initialized and is
operational
A fiber optic cable is
connected and link is
established correctly
Low signal, received
messages can still be
decoded
No baudrate detected
or no connection/signal
ON
103/219
Advertisement
Table of Contents
