Hardware Or Software Settings (H/S) - Procentec ComBricks User Manual

3.10.3 Hardware or software settings (H/S)

Set this switch to enable hardware (dipswitches) or software settings.
H/S Settings
LEFT Hardware
RIGHT Software

When software is enabled, all switch settings
are overruled. The settings are saved in the internal
memory of the Head Station.
Repeater Module
status
Data received on
Channel x
Channel 2 and Channel 1 and
Channel 1 Channel 2
Dipswitches or web
server settings
Fig. 24 - Dipswitches and LEDs of the repeaters
ComBricks User Manual v6.4.0 | January 18| © PROCENTEC
Termination ON
on Channel x
Communication
error on Channel x
Network 1: NW0 = L, NW1 = L Network 1: NW0 = L, NW1 = L
Network 2: NW0 = R, NW1 = L Network 2: NW0 = R, NW1 = L
Network 3: NW0 = L, NW1 = R Network 3: NW0 = L, NW1 = R
Network 4: NW0 = R, NW1 = R Network 4: NW0 = R, NW1 = R
Redundancy for the
current network
37/219