4.8.3
External protocols
The following login information is required for external protocols, for example for FTP and TELNET.
User:
user or admin
Administrator:
<your password>
Any FTP client can be used to setup the FTP connection. ComBricks uses port 21.
If you have not set a password, ComBricks will accept any password during the connection phase. Some FTP
clients require a password, so you can provide any password.
4.8.4
Clearing password(s)
There are 3 ways to restore the password(s) to their default setting:
•
Change the passwords with no text written in the text field (Administrator login required).
•
Restore to factory default settings in the "Device management" page (Administrator login required).
•
Restore to factory default settings with the switch on the front of the Head Station (see Paragraph 6.5).
ComBricks User Manual v6.4.0 | January 18| © PROCENTEC
52/219