Leds On The Head Station - Procentec ComBricks User Manual

6.6 LEDs on the Head Station

In the tables below the LEDs of the Head Stations during normal operation are described. The LED conditions in
firmware update and menu mode are not described here.
RDY - Ready
Starting up
Run
ETH - Ethernet
No Ethernet link established
DHCP configuration is pending
Ethernet link established
SF - System failure on the Head Station
OK
Backplane voltage too low (under 5,5 VDC) or current draw
to high (above 2,5 A)
Clock-chip error
(contact your local Distributor or PROCENTEC)
Internal component or firmware error
(contact your local Distributor or PROCENTEC)
ComBricks User Manual v6.4.0 | January 18| © PROCENTEC
OFF Blinking
X
OFF Blinking
X
X
OFF Blinking
X
Fast
Slow
ON
X
ON
X
ON
X
80/219