4.8 Password setup and login
Head Stations:
1A, 1B, 1C
Firmware:
V1.100 and higher
Login:
Administrator
Passwords are NOT activated when the
product is purchased or reset and all menu
items are accessible and adjustable.
ComBricks supports 2 types of passwords;
User:
Is limited to read information
Administrator:
Has access to the full web server and can adjust settings
•
The Administrator password has to be set first.
•
The passwords can have a length between 1 and 16 characters.
Fig. 34 illustrates the password setup web page.
4.8.1
Access rights
After a password(s) has been setup, it complies with the access rights from Table 1.
Table 1 - Access rights after password setup
Login required at
web server access
Visiting web pages
Clear "System log"
Restart the device in the
"Device management"
Output Control
Changing passwords
Adjusting all other settings
3
When only the Administrator login has been activated, the user can always enter the web server without a
valid login. When settings need to be altered, the administrator is required to login.
ComBricks User Manual v6.4.0 | January 18| © PROCENTEC
NO
Administrator
Passwords
NO
YES
YES
YES
YES
YES
YES
User
(Admin. is set)
3
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
NO
50/219