System Status Check - Technoalarm TP4-20 User Manual

6.1.1

SYSTEM STATUS CHECK

To consult system status press:
+ 1
The message relating to the current system status is played:
Message relating to the system status
6.1.2 ARMING/DISARMING OF THE PROGRAMS
To enter the program menu press:
+ 2
The following message is played:
Menu program - to return to menu press hash
Submenus
Check program status
Arming/disarming of programas
CHECK PROGRAM STATUS
To consult the status of the programs, enter the program number:
+ 1...4
Selection of the program (1 to 4)
The control panel plays the message relating to the current program status (armed or in stand-by) and the alarms
stored (alarm memory):
Message relating to the program status and the alarms stored
+ #
to return to the main menu
ARMING/DISARMING OF THE PROGRAMS
To arm or disarm the programs, enter the program number preceding it with the key * (star), e.g.:
+ *1
Arming/disarming program 1
+ *2
Arming/disarming program 2
+ *3
Arming/disarming program 3
+ *4
Arming/disarming program 4
Repeat the command for all the programs to be armed.
The control panel signals possible open zones or those in trouble.
Message relating to the open zones or those in trouble
+ #
to return to the main menu
EXCLUSION OF OPEN ZONES
To arm a program excluding the open zones repeat the number of the corresponding program:
+ 1
Exclusion of the open zones contained in program 1
+ 2
Exclusion of the open zones contained in program 2
+ 3
Exclusion of the open zones contained in program 3
+ 4
Exclusion of the open zones contained in program 4
The control panel plays the message relating to the exclusion of open zones.
WARNING
The zones in trouble cannot be excluded.
+ #
to return to the main menu
6-2 Control by Telephone User Manual - TP4-20