Technoalarm TP4-20 User Manual page 50

Arming
Ctrl panel OK
OPEN ZONES
Zone xxx
ZONES EXCLUDED
WARNING
If the open zones are not excluded, on expiry of the zone exclusion time (and perhaps the exit time)
the programs are armed and the open zones are activated. En consecuencia, se activa la alarma.
Arming
Program x
EXCLUDE ? with #
Zone xxx
WARNING
The zones definded as NOT EXCLUDIBLE are not listed. If a zone is already excluded it does not
appear in the list either.
- ACCESS -
Master
Arming
Program x
WARNING
The programs that are already armed are not influenced.
To abort arming of the programs selected press CL-EX (LCD020 and LCD012). The process is
aborted and the control panel returns to stand-by.
Control by Console
4-6
these programs.
On condition that there are no open zones and arming has been completed correctly,
on the display is viewed Arming ctrl panel OK.
If the programs selected do not contain delayed zones, on expiry (or abort) of the
zone exclusion time, the programs in question are armed and the corresponding
program leds become lit immediately.
4.1.1.1 EXCLUSION OF OPEN ZONES
After selecting the programs to be armed, during the 10-seconds zone exclusion time,
if there are open zones (direct or delayed type 2), these are viewed in sequence on
the display (LCD020 and LCD012).
A zone may result open for instance in case of fault of the detector connected.
To arm the programs selected excluding the open zones, press:
+ #
The zones remain excluded until disarming of the program. They are activated
automatically again the next time the program is armed.
4.1.1.2 VOLUNTARY EXCLUSION OF ZONES
After selecting the programs to be armed, during the 10-seconds zone exclusion time,
it is possible to exclude some of the zones volontarily from the detection of alarms.
Select the zones to be excluded pressing:
+ yw
to select the zones to be excluded
On the display are viewed in sequence all the zones included in the programs
selected.
Exclude the zone selected pressing:
+ #
to exclude the zone selected
Select another zone to be excluded with the keys arrow up and arrow down or
exclude sequential zones pressing repeatedly # (hash).
Once you have excluded all the zones you wanted to exclude, it is possible to confirm
the exclusion and procede with arming without awaiting expiry of the zone exclusion
time by pressing:
+ CL-EX
to confirm the exclusion and abort the zone exclusion time
If all the zones are excluded, the process is stopped automatically.
IMMEDIATE CONFIRMATION OF ARMING
The zone exclusion time stops approximately after 10 seconds from the exclusion of
the last zone.
It is possible to abort the wait and obtain immediate arming by pressing:
+ #
The zones remain excluded until disarming of the program. They are activated
automatically again the next time the program is armed.
4.1.1.3 TOTAL ARMING
After entering the master code and during the 10 seconds destinated for the selection
of the programs, it is possible to obtain total arming, i.e. arming of all the programs by
pressing:
+ #
to arm all the programs
The control panel initiates the zone exclusion time.
The corresponding program leds start blinking.
User Manual - TP4-20