Parameterization Of The Telephone Section - Technoalarm TP4-20 User Manual

Timer 01 5
Blocked [ # ]
Time 3
Acc. periods
Acc. periods 1
Period 01
Period 01 1
Attrib. beg.
Period 01 2
Attrib. end
Period 01 3
Hour beg.
Period 01 4
Hour end
Menu 10
Telephone
TP4-20 - User Manual
TEMPORARY BLOCK
Permits the temporary block of the timer selected, i.e. its next activation is skipped.
The timer is activated again upon the subsequent activation.
On the display is viewed current programming:
[ ] Timer not blocked
[ # ] Timer blocked on the next activation
Commands available
+ #
to skip the next activation of the timer selected
+ *
to undo the temporary block
+ CL-EX
to confirm and quit
3.1.5.2 ACCESS PERIODS OF THE CODES/ELECTRONIC KEYS/WIRELESS
KEYS
The access periods permit scheduling of the access to the system with code,
electronic key and wireless key. The control panel provides a total of 2 independently
programmable access periods.
SELECTION OF THE ACCESS PERIODS
+ wy
to select the access period to be programmed
+ #
to confirm the selection
For every access period the following parameters can be programmed:
Attribute beginning (frequency of activation)
Attribute end (frequency of deactivation)
Time beginning (activation time)
Time end (deactivation time)
Commands available
+ wy
to select the parameter to be programmed
+ #
to confirm the selection
ATTRIBUTE
Every access period can be activated with the following frequencies:
Inactive
Every day
Every working day
Every holiday eve
Commands available
+ wy
to select the parameter to be programmed
+ #
to confirm the selection
+ CL-EX
to confirm programming and quit
TIME OF BEGINNING/END
For every access period it is possible to program the time of beginning and end of the
access to the system, i.e. enabling and disabling of the codes, electronic keys and
wireless keys.
Commands available
+ wy
to select the parameter a programar
+ 0...9
to program the time of beginning and end
+ CL-EX
to confirm and quit
3.1.6

PARAMETERIZATION OF THE TELEPHONE SECTION

From the master programming menu select the submenu telephone.
In the telephone menu the following parameters can be programmed:
Setting
PABX (PABX number in case of connection after a PABX switchboard)
Channel A (parameters of channel A)
Channel B (parameters of channel B)
Channel C (parameters of channel C)
Channel D (parameters of channel D)
Channel E (parameters of channel E)
Channel F (parameters of channel F)
Channel G (parameters of channel G)
Channel H (paremeters of channel H)
Call back (numbers and condition of execution of the call back)
Mobile (parameters of the telephone communicator with GSM module)
Commands available
+ wy
to select the parameter to be programmed
+ #
to confirm the selection
Every holiday
Every Sunday
Every Monday
Every Tuesday
Every Wednesday
Every Thursday
Every Friday
Every Saturday
Programming
3-5