Technoalarm TP4-20 User Manual page 45

4. CONTROL BY CONSOLE
The control panel can be controlled and programmed using the LCD consoles (LCD020 and LCD012) and piloted
through LED console (LED06) by different operators using diffrent access codes.
Every code is enabled to accede to a specific operating level of the control panel.
The system distinguishes the following codes:
1 installer code (default 54321)
The installer code is reserved to the installer and gives access to the installer menu (see chapter 5).
WARNING
If the control panel is armed, the installer will not be able to execute any programming by console,
i.e. he will not be given access to the installer programming menu (access denied).
1 master code (default 12345)
The master code is generally reserved to the owner of the system and gives access to the master programming
menu as well as the standard functions of arming/disarming and bypass.
TP4-20 - User Manual Control by Console
4-1