Telephone Menu - Technoalarm TP4-20 User Manual

6. CONTROL BY TELEPHONE
This chapter treats the operations that can be executed by telephone both calling the control panel for system status
check and during an alarm call received from the control panel.
The operations explained are only possible if the controlpanel is equipped with the vocabulary (option).
The telephone menu permits system status check and the initiation of a number of operations (telephone menu) calling
the control panel on purpose, whereas it permits the verification of the alarms (RDV
6.1

TELEPHONE MENU

The telephone menu permits the executionof the following functions:
System status check (system OK or in alarm)
Arming/disarming of programs and system status check (in stand-by or armed)
Activation/deactivation and check of the status of the remote controls
Remote digital verification (RDV
Recording of the telephone opening message
Dial the telephone number of the line to which the control panel is connected.
On answering, the control panel emits a beep.
To enter the telephone menu, enter the master code or a standard user code programmed accordingly, e.g. master
code (default code 12345):
+ 12345
The control panel reproduces the following voice messages:
TP4-20 - User Manual
® ) by the detectors selected
®
) during a vocal alarm call received.
Control by Telephone 6-1