Access Codes - Technoalarm TP4-20 User Manual

1. GENERAL FEATURES
TP4-20 - User Manual
TP4-20 is a new generation microprocessor-based control panel,
extremely user-friendly.
It controls 4 to 20 zones selectable from the inputs of the CPU
board, or from the internal input extension module or that
conected via serial bus or the optional wireless modules.
The control panel is programmable by PC or LCD console
(LCD020, LCD012).
The final user may do some simple parameterizations by
console and control the system by console, electronic keypad,
electronic key or wireless key.
In addition, it is possible to initiate determined processes by
telephone.
1.1

ACCESS CODES

For the control by console, electronic keypad and telephone the
following access codes are available:
Master
The master code gives access to the master menu that in
addition to total and partial arming and disarming permits
programming of some of the functioning parameters.
Since it permits programming of the standard user codes,
too, the master code is usually reserved to the owner of the
system.
The default master code is
12345
Standard user
The standard user codes permit only arming and disarming
of the control panel and related operations.
The system recognizes a total of 200 standard user codes.
Merely the holder of the master code can program the
standard user codes and determine their level of access.
1.2 OPERATIONS EXECUTABLE BY
CONSOLE
1.2.1 OPERATIONS EXECUTABLE WITH
MASTER CODE
PROGRAMMING
Clock setting
Programming of the chime zones (the opening of which is
signaled even if the control panel is disarmed)
Creation and modification of the programs
Programming of 4 timers for scheduled operations
Programming of 2 access periods of the codes, electronic
keys and wireless keys
Programming of the telephone functions
» Enabling of the answering mode
» Programming of the number of rings prior to answering
» Programming of the pabx number (in case of connection
after a PABX switchboard)
» Programming of the telephone numbers of the channels
(2 numbers per channel)
» Manual call back
» Enabling of the answering mode of the GSM telephone
communicator
» Programming of the emergency number of the GSM
telephone communicator (to be called if the
communication between the control panel and the GSM
telephone communicator is interrupted)
General Features
1-1