Technoalarm TP4-20 User Manual page 5

PREFACE
APPLICATION NOTES
The alarm system TP4-20 is very easy to use. Thus, it is recomended to arm the system every time you leave the
house or appartment unattended, even if only for a short period of time.
For your own safety keep all the access codes secret.
In case one of the codes, keys or wireless keys is stolen or lost, contact your installer immediately for its replacement.
WHEN YOU ARE AT HOME
Whenever possible close all the access points (e.g. doors, windows).
If necessary arm part of the system in order to protect the unused areas and if need be arm the perimeter protection.
WHEN YOU LEAVE THE HOUSE
Verify thoroughly that all the entrance doors and windows are closed.
Ensure that the system is working correctly and that there is no alarm or error signaling on the console.
Remember to arm the entire system (all the programs necessary for arming all the zones of the system).
WHEN YOU ARE PREPARING FOR A JOURNEY
Ensure that all the batteries of the system have been checked and if necessary replaced by the installer with the
periodicity provided for.
Check all the entrance doors and windows thoroughly again and ensure that they are well closed.
Arm the system on test in order to verify correct functioning.
On departure arm the system completely.
TP4-20 - User Manual Preface
I