Activation/Deactivation Of The Remote Controls - Technoalarm TP4-20 User Manual

Menu 1
Rem. ctrl
Rem. ctrl 1
Activation [ ]
Menu 2
Clock
Fri 30 JAN 04
Work. 11 : 15
Menu 5
Functions
Functions 5
Chime
Chime 9
Ctrl panel Z 1 [ # ]
Menu 6
Programs
Programs 1
Program 01
Program 01
Associate zones
Associate zones
Ctrl panel Z 1 [ # ]
WARNING
If a zone is included in more than one program and is defined common zone, it is only activated
when all the programs it belongs to are armed.
TP4-20 - User Manual
3.1.1 ACTIVATION/DEACTIVATION OF THE REMOTE
CONTROLS
SELECTION OF THE REMOTE CONTROL
+ wy
to select the remote control (1 to 2)
+ #
to confirm the selection
On the display is viewed the current status:
[ ] Remote control deactivated (in stand-by)
[ # ] Remote control active
Commands available
+ #
to activate the remote control selected
+ *
to deactivate the remote control selected
+ CL-EX
to confirm and quit
3.1.2 CLOCK SETTING
From the master programming menu select the submenu clock.
Commands available
+ wy
to select the parameter to be modified
+ 0...9
to program the date and the time
+ CL-EX
to confirm and quit
3.1.3 ACTIVATION OF CHIME
The function chime permits to define a zone or a group of zones the opening of which
is signalled by buzzer if the control panel is in stand-by. According to programming,
the buzzer can be activated once for 2 seconds on every opening of the zone or for 3
seconds on every opening and continuously if the zone remains open.
From the master programming menu select the submenu functions and select the
parameter chime, by pressing:
+ wy
to select the parameter chime
+ #
to confirm the selection
SELECTION OF THE ZONE
+ wy
to select the zone (1 to 20)
+ #
to confirm the selection
On the display is viewed current programming:
[ ] Function chime inactive
[ # ] Function chime active
Commands available
+ #
to activate the function chime on the zone selected
+ *
to deactivate the function chime on the zone selected
+ CL-EX
to confirm and quit
3.1.4 CREATION/MODIFICATION OF THE PROGRAMS
It is possible to create 4 programs that group the zones (1 to 20 each) to be activated,
i.e. enabled for the detection of alarms, simultaneously. The programs can be
modified afterwards including or removing zones from it.
From the master programming menu select the submenu programs.
SELECTION OF THE PROGRAM
+ wy
to select the program (1 to 4)
+ #
to confirm the selection
Initiate the creation/modification of the program by pressing:
+ #
to create/modify the program selected
SELECTION OF THE ZONES
+ wy
to select the zones (1 to 20)
+ #
to confirm the selection
On the display is viewed current programming:
[ ] Zone not included in the program selected
[ # ] Zone included in the program selected
Commands available
+ #
to include the zone in the program selected
+ *
to remove the zone from the program selected
+ CL-EX
to confirm and quit
Programming
3-3