Operations Executable With Standard User Code - Technoalarm TP4-20 User Manual

» Programming of the emergency SMS of the GSM telephone communicator (to be sent if the communication
between the control panel and the GSM telephone communicator is interrupted instead of the emergency call)
Programming and modification of the values and attributes of the master code and the standard user codes
(1 to 20)
Programming and recognition of the electronic keys (1 to 16)
Programming and recognition of the wireless keys (1 to 16)
Voluntary exclusion of the extension modules (e.g. in case of failure)
Access to the test menu for functioning check
Enabling of remote access
Permits the installer to accede to the system via telephone line using the programming and monitoring software in
order to verify or modify the functioning parameters of the control panel.
FUNCTIONING
Activation and deactivation of the remote controls (1 to 2)
Total or partial arming of the control panel through the programs (1 to 4)
Total disarming of the control panel (all programs)
Partial disarming of the control panel
Total arming/disarming of the control panel with the keys # (hash) and * (star)
Consultation of the event buffer of the control panel
Clearing of the event buffer of the control panel
Abort of the active telephone calls
1.2.2

OPERATIONS EXECUTABLE WITH STANDARD USER CODE

PROGRAMMING
Clock setting
Programming of the telephone functions
» Programming of the telephone numbers of the channels (2 numbers per channel)
FUNCTIONING
Activation or deactivation of the remote controls associated (1 to 2)
Arming of the control panel through the programs associated (1 to 4)
N.B.
Every code can arm and disarm only those programs it has been enabled for.
Total or partial disarming of the control panel
Total arming/disarming of the control panel with the keys # (hash) and * (star)
Consultation of the event buffer of the control panel
Clearing of the event buffer of the control panel
Abort of the active telephone calls
1.3 OPERATIONS EXECUTABLE BY TELEPHONE
It is possible to execute determined operations at distance via telephone line.
Calling the control panel (upon answering emits a beep) and entering a user code (master or standard user) access is
given to the telephone menu.
The following functions are available:
System status check
The control panel lists the alarms detected.
Program status check and arming/disarming of the programs
The control panel signals program status (stand-by/alarm) and possible program alarms stored.
It is possible to arm or disarm programs. After arming/disarming program status and possible program alarms
stored are signaled again.
Activation/deactivation of the remote controls
The control panel signals remote control status (active/deactivated).
It is possible to activate or deactivate the remote controls. After the activation/deactivation remote control status is
signaled again.
Verification of the RDV detectors
The RDV detectors are doppler detectors that transmit a sound signal proportionate to the movement detected.
It is possible to activate the verification of all the active RDV detectors for approximately 30 seconds.
Recording of the opening message (with master code only)
It is possible to record the opening message with a fix duration of approximately 10 seconds. The opening
message is reproduced at the beginning of every alarm call.
General Features
1-2
User Manual - TP4-20