Figure 3-24. Multilink Trunk Configuration Menu Screen - Nortel 10BASE-T Using Manual

Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu.
Figure 3-24. MultiLink Trunk Configuration Menu Screen
Table 3-21
Table 3-21. MultiLink Trunk Configuration Menu Screen Options
Option
MultiLink Trunk
Configuration...
MultiLink Trunk
Utilization...
Return to Switch
Configuration Menu
309985-C Rev 00
MultiLink Trunk Configuration Menu
MultiLink Trunk Configuration...
MultiLink Trunk Utilization...
Return to Switch Configuration Menu
describes the MultiLink Trunk Configuration Menu screen options.
Description
Displays the MultiLink Trunk Configuration screen
allows you to configure up to six MultiLink trunks within a standalone switch or
within a stack configuration. You can group up to four switch ports to form each
trunk.
Displays the MultiLink Trunk Utilization screen
This screen allows you to monitor the bandwidth utilization of the configured
trunks.
Exits the MultiLink Trunk Configuration Menu screen and displays the Switch
Configuration Menu screen.
Using the Console Interface
Press Ctrl-C to return to Main Menu.
(Figure
(Figure 3-26
3-25). This screen
and Figure 3-27).
3-59