SSH, Telnet, or Remote RACADM
racadm -r <cmcIPAddr> -u username -p password <subcommand>
racadm -r <cmcIPAddr> -u username -p password getconfig -g <group name> -o <object name>
racadm <subcommand>
Example
racadm getsysinfo
racadm -r 192.168.0 -u username -p xxx getsysinfo
racadm -r 192.168.0 -u username -p xxx getconfig -g cfgchassispower
SSH or Telnet RACADM
racadm getconfig -g <groupname> [-o <objectname>][-i <indexnumber>]
racadm <subcommand>
Example
racadm getconfig -g idracinfo
racadm getsysinfo
Remote RACADM
racadm -r <cmcIpAddr> -u <username> -p <password> <subcommand>
Example
racadm -r 192.168.0 -u root -p xxxx getsysinfo
Security Alert: Certificate is invalid - Certificate is not signed by Trusted Third Party
Continuing execution.
NOTE: The following command does not display a security error:
racadm -r 192.168.0 -u noble -p xxx getsysinfo --nocertwarn
RACADM Command Options
The following table lists the options for the RACADM command:
Option
-r <cmcIpAddr>
-u <username>
-p <password>
--nocertwarn
-i <indexnumber>
-g <groupname>
-o <objectname>
8
Description
Specifies the controller's IP address.
Specifies the user name that is used to authenticate the command
transaction. If the-u option is used, the -p option must be used, and
the -i option (interactive) is not allowed.
Specifies the password used to authenticate the command
transaction. If the -p option is used, the -i option is not allowed.
Does not display certificate related warning message.
Specifies the index number for the indexed group, if applicable.
Specifies the group name if applicable.
Specifies the object name if applicable.