Dell PowerEdge M1000e Reference Manual page 102

cfgRacTuneUserBlkEnable (Read or Write)
Blocks the login for maximum of 5 minutes after 5 unsuccessful login attempts. The login using any interface
Description
such as WSMAN or GUI is blocked after 5 unsuccessful attempts
• 1 — Enabled
Legal Values
• 0 — Disabled
0 — Disabled
Default
cfgRacTuneSshPort (Read or Write)
Specifies the port number used for the SSH interface.
Description
10–65535
Legal Values
22
Default
cfgRacTuneTelnetPort (Read or Write)
Specifies the port number used for the Telnet interface.
Description
10–65535
Legal Values
23
Default
cfgRacTuneDaylightOffset (Read Only)
Specifies the daylight savings offset (in minutes) to use for the RAC Time. This value is 0 if the time zone is not
Description
a Daylight Saving time zone.
0–60
Legal Values
0
Default
Example
racadm getconfig -g cfgRacTuning [-m server-<n>] -o
<
object name
> <
object value
>
cfgRacTuneRemoteRacadmEnable=1
cfgRacTuneWebserverEnable=1
cfgRacTuneHttpPort=80
cfgRacTuneHttpsPort=443
cfgRacTuneTelnetPort=23
102
NOTE: This is applicable only to configure the user privilege.
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, and 60106.
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, and 60106.