Dell PowerEdge M1000e Reference Manual page 39

Chassis management controller version 5.0 for dell poweredge m1000e racadm command line
Hide thumbs Also See for PowerEdge M1000e:
Table of Contents

Advertisement

Input
Example
Display MACs for all modules.
racadm getmacaddress
Display iSCSI MAC addresses for all servers.
racadm getmacaddress -t iscsi
Display iSCSI MAC for server-1.
racadm getmacaddress -m server-1 -t iscsi
Display extra iSCSI MACs for server-1 (if available).
racadm getmacaddress -m server-1 -t iscsi -x
Display the user-defined MAC and WWN address.
– racadm getmacaddress -c io-identity
– racadm getmacaddress -c io-identity -m server -x
Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.
racadm getmacaddress -c all
Displays the chassis-assigned WWN/MAC address.
racadm getmacaddress -c flexaddress
Displays the MAC/WWN addresses for all LOMs or mezzanine cards.
racadm getmacaddress -c factory
Displays the MAC address for chassis.
racadm getmacaddress -m chassis
racadm getmacaddress -c Flexaddress
racadm getmacaddress -c Factory
racadm getmacaddress -c all
-m <module> — Specifies the module whose MAC address you want to view.
<module> may be one of the following:
server-<n>, where n=1–16
server-<nx>, where n=1–8; x=a,b,c,d (lower case)
switch-<n>, where n=1–6
-t — Displays the iSCSI MAC addresses for all servers or the specified server if used with -m option.
-x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACs and must be
used with -m option.
-a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC or LOMs or mezzanine cards.
When FlexAddress is enabled for a particular slot, then the chassis-assigned MAC/WWN address is
displayed.
-c — Displays the ethernet and iSCSI MAC/WWN and assignment type, partition status of all LOMs or
mezzanine cards. The -c option must be one of the following values:
– IO-Identity — Displays the user-defined MAC/WWN addresses.
– FlexAddress — Displays the chassis-assigned MAC/WWN addresses.
– Factory — Displays factory MAC/WWN addresses.
– all — Displays Ethernet and iSCSI MAC/WWN address, Assignment Type, and Partition Status of all
LOMs or mezzanine cards.
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents