•
getpbinfo
Description
Displays power budget status information.
To run this subcommand, you must have the CMC Login User privilege.
racadm getpbinfo
Synopsis
Input
N/A
Example
Displays power budget status information
racadm getpbinfo
[Power Budget Status]
System Input Power
Peak System Power
Peak System Power Timestamp
Minimum System Power
Minimum System Power Timestamp
Overall Power Health
Redundancy
System Input Power Cap
Redundancy Policy
Dynamic PSU Engagement Enabled
System Input Max Power Capacity
Input Redundancy Reserve
Input Power Allocated to Servers
Input Power Allocated to Chassis
Infrastructure
Total Input Power Available for
Allocation
Standby Input Power Capacity
Server Based Power Management Mode
Max Power Conservation Mode
Server Performance Over Power Redundan
cy
Power Available for Server Power-on
Extended Power Performance (EPP)
Status
46
Display iDRAC network settings in server slot 1
racadm getniccfg -m server-1
= 1574 W
= 1916 W
= 09:29:20 11/26/2014
= 374 W
= 09:20:51 11/26/2014
= OK
= No
= 16685 W
= None
= No
= 16685 W
= 0 W
= 1826 W
= 1212 W
= 13648 W
= 0 W
= No
= No
= No
= 13648 W
= Disabled