Dell PowerEdge M1000e Reference Manual page 123

cfgChassisStandbyInPowerCapacity (Read Only)
Indicates the amount of power (in watts) available for powering up any hardware modules that are either added
Description
to the chassis or powered up (if they are already present in the chassis).
None
Legal Values
None
Default
cfgChassisPowerClear (Write Only)
Resets cfgChassisMinPower and cfgChassisMaxPowerCapacity, when set to 1.
Description
None
Legal Values
None
Default
cfgChassisPowerClearTimestamp (Read Only)
Time stamp when cfgChassisMinPower and cfgChassisMaxPowerCapacity were reset.
Description
None
Legal Values
None
Default
cfgChassisPowerButtonEnable (Read or Write)
Indicates if the chassis power button is enabled or disabled.
Description
• 0 — Disabled
Legal Values
• 1 — Enabled
None
Default
cfgSystemEnergyConsumptionClear (Write Only)
Resets energy statistics when set to 1.
Description
None
Legal Values
None
Default
Examples
•
racadm getconfig -g cfgChassisPower
# cfgChassisInPower=0 W | 0 BTU/hr
# cfgChassisPeakPower=0 W
# cfgChassisPeakPowerTimestamp=06:32:55 01/26/2009
# cfgChassisMinPower=0 W
# cfgChassisMinPowerTimestamp=06:32:55 01/26/2009
# cfgChassisPowerStatus=5
# cfgChassisRedundantState=0
cfgChassisPowerCap=16685 W
cfgChassisPowerCapF=16685 W
123