Cfgcurrentipv6Lannetworking (Read Only) - Dell PowerEdge M1000e Reference Manual

cfgNicCurrentIPv4Enabled (Read or Write)
Indicates whether IPv4 is enabled on the CMC. If the current property value is set to 0 (false), the remote
Description
network interfaces to the CMC are not accessible over IPv4.
• 0 — Disabled
Legal Values
• 1 — Enabled
1
Default
Example
racadm getconfig -g cfgCurrentLanNetworking
# cfgNicCurrentIPv4Enabled=1
# cfgNicCurrentIpAddress=143.166.152.116
# cfgNicCurrentNetmask=255.255.255.0
# cfgNicCurrentGateway=143.166.152.1
# cfgNicCurrentDhcpWasUsed=0
# cfgNicCurrentVlanEnable=0
# cfgNicCurrentVlanID=1
# cfgNicCurrentVlanPriority=0
# cfgDNSCurrentServer1=192.168.0.5
# cfgDNSCurrentServer2=192.168.0.6
# cfgDNSCurrentDomainName=MYDOMAIN

cfgCurrentIPv6LanNetworking (Read Only)

This group displays the current CMC IPv6 properties.
Use this object with the getconfig subcommand.
To use this object property, you must have the CMC Login User privilege.
cfgCurrentIPv6Enabled (Read or Write)
Indicates whether IPv6 is enabled on the CMC. If the current property value is set to 0 (false), the remote
Description
network interfaces to the CMC are not accessible over IPv6.
• 0 — Disabled
Legal Values
• 1 — Enabled
0
Default
cfgCurrentIPv6AutoConfigWasUsed (Read or Write)
Indicates whether auto configuration is used to obtain IPv6 settings, including stateless IPv6 addresses and
Description
gateway.
0 (static addressing is used)
Legal Values
1 (address is obtained from the DHCPv6 server and/or stateless auto configuration)
None
Default
131