Dell PowerEdge M1000e Reference Manual page 127

Chassis management controller version 5.0 for dell poweredge m1000e racadm command line
Hide thumbs Also See for PowerEdge M1000e:
Table of Contents

Advertisement

cfgIPv6Address (Read or Write)
Assigns a static IPv6 address to the CMC. This property is used only if cfgIPv6AutoConfig is set to 0
Description
(false).
A string representing a valid IPv6 address. For example, 2001:DB8:1234:5678:9ABC:DE11:C00C:BEEF
Legal Values
" :: "
Default
cfgIPv6Gateway (Read or Write)
CMC gateway IPv6 address.
Description
Specifies string representing a valid IPv6 entry.
Legal Values
" :: "
Default
cfgIPv6PrefixLength (Read or Write)
Specifies the prefix length for IPv6 address.
Description
0–128
Legal Values
64
Default
cfgIPv6AutoConfig (Read or Write)
Enables or disables the IPv6 Auto Configuration option.
Description
1 (TRUE)
Legal Values
0 (FALSE)
1
Default
cfgIPv6DNSServersFromDHCP6 (Read or Write)
Specifies whether cfgIPv6DNSServer1 and cfgIPv6DNSServer2 are static or DHCP IPv6
Description
addresses.
NOTE: This property is used only if cfgIPv6AutoConfig is set to 0 (false).
NOTE:
This property is used only if cfgIPv6AutoConfig is set to 0(false)
NOTE: If this value is set to 0, the CMC disables auto configuration and statically assigns IPv6
addresses. If this value is set to 1, the CMC obtains address and route information using stateless
auto configuration and DHCPv6.
NOTE: The CMC uses its MAC address for its DUID (DUID-LL) when communicating with a DHCPv6
server.
127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents