Cfgstandardschema; Cfgssadrolegroupindex (Read Only); Cfgssadrolegroupname (Read Or Write); Cfgssadrolegroupdomain (Read Or Write) - Dell PowerEdge M1000e Reference Manual

cfgStandardSchema

This group contains parameters to configure the Active Directory standard schema settings.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure a setting that does not have hash sign (#) prefixed in the output. To modify a configurable
object, use the —o option.
The following sections provide information about the objects in the cfgStandardSchema.

cfgSSADRoleGroupIndex (Read Only)

Index of the Role Group as recorded in the Active Directory.
Description
An integer from 1 to 5
Legal Values
<instance>
Default

cfgSSADRoleGroupName (Read or Write)

Name of the Role Group as recorded in the Active Directory forest.
Description
Any printable text string of up to 254 characters, with no white space.
Legal Values
<blank>
Default

cfgSSADRoleGroupDomain (Read or Write)

Active Directory Domain in which the Role Group resides.
Description
Any printable text string of up to 254 characters, with no white space.
Legal Values
<blank>
Default

cfgSSADRoleGroupPrivilege (Read or Write)

Description
Legal Values
Default

cfgLocation

This group defines objects that support physical location properties. Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
Use the bit mask numbers listed in the table below to set role-based authority privileges for a Role
Group.
0x00000000 to 0x000001ff
<blank>
115