Setractime - Dell PowerEdge M1000e Reference Manual

• Configuration of Speed= 100 Mbps and duplex= full duplex.
Example
racadm setniccfg -k 100 full
• Configuration of Speed and Duplex to Autonegotiate.
racadm setniccfg -k
• Configuration of VLAN id and priority of a slot or all blades in a sleeve.
racadm setniccfg -i 5 -v 1000
• Configuration of CMC to a static IPv6 address.
racadm setniccfg -m chassis -s -6 2001:DB8::2 64 2001:DB8::1
• Configuration of server to use stateless autoconfiguration address.
racadm setniccfg -m server-1 -d -6
• Configuration of VLAN id and priority for a switch.
racadm setniccfg -m switch-1 -v 1000 7
• Removal of VLAN configuration from a switch.
racadm setniccfg -m switch-1 -v
• Configuration of redundant mode
racadm setniccfg -r 1

setractime

Description Sets the date and time on the CMC.
To run this subcommand, you must have the Administrator privilege.
•
Synopsis racadm setractime -d <YYYYMMDDhhmmss.mmmmmmsoff>
•
racadm setractime -l <YYYYMMDDhhmmss>
•
racadm setractime -z ?|<timezone>|<timezone-prefix>*
• -d — Sets the time in the string YYYYMMDDhhmmss.mmmmmmsoff, where:
Input
– YYYY is the four digit year
– MM is the month
– DD is the day
– hh is the hour
– mm is the minute
– ss is the second
– mmmmmm is the number of microseconds
– s is a + (plus) sign or a − (minus) sign, which indicates the sign of the offset.
– off is the offset in minutes.
• -z <zone> — Sets the time zone by name or index, or lists possible time zones. For example, PST8PDT
(Western United States), 294 (Seoul), 344 (Sydney). <zone> may be:
– ? lists the major timezone names or prefixes.
– <timezone> is the case-sensitive name of your timezone or the index listed in -z
– <timezone_prefix>* is a prefix of one or more timezones, followed by '*'.
NOTE: Theoff is the offset in minutes from GMT and must be in 15-minute increments. The
timezone is represented as an offset from GMT. The clock does not automatically adjust to daylight
savings time (for -d option).
<timezone_prefix>*.
NOTE: The timezone or daylight savings time is fully supported for -land -z options. To set the
timezone only (for example -z US/Central), do not specify the -l option.
7
69