Sslresetcfg; Testemail - Dell PowerEdge M1000e Reference Manual

Chassis management controller version 5.0 for dell poweredge m1000e racadm command line
Hide thumbs Also See for PowerEdge M1000e:
Table of Contents

Advertisement

To run this subcommand, you must have the Configure chassis administrator privilege.
Synopsis
racadm sslcsrgen -g
racadm sslcsrgen [-g] [-f <filename>]
racadm sslcsrgen -s
-g — Generates a new CSR.
Input
-s — Returns the status of a CSR generation process (generation in progress, active, or none).
-f — Specifies the filename of the location, <filename>, where the CSR is downloaded.
Output
If no options are specified, a CSR is generated and downloaded to the local file system as sslcsr by default. The
-g option cannot be used with the -s option, and the -f option can only be used with the -g option.
The sslcsrgen -s subcommand returns one of the following status codes:
CSR was generated successfully.
CSR does not exist.
Example
Display current status of CSR operation:
racadm sslcsrgen -s
or
racadm sslcsrgen -g -f c:\csr\csrtest.txt
Generate and download a CSR to local filesystem:
racadm -r 192.168.0.120 -u root -p calvin sslcsrgen -g -f csrtest.txt
NOTE: Before a CSR can be generated, the CSR fields must be configured in the RACADM config —g
cfgracsecurity group. For example:
racadm config -g cfgracsecurity -o cfgRacSecCsrCommonName cmc-effort.cmc.com
NOTE: In Telnet or SSH console, you can only generate and not download the CSR file.

sslresetcfg

Description
Restores the web-server certificate to factory default and restarts web-server. The certificate takes effect 30
seconds after the command is entered.
To run this subcommand,you must have the Chassis Configuration Administrator privilege.
racadm sslresetcfg
Synopsis
Input
N/A
racadm sslresetcfg
Example
Certificate generated successfully and webserver restarted.

testemail

Sends a test email from CMC to a specified destination. Prior to running the test email command, make sure that
Description
the SMTP server is configured.
NOTE:
If the -f option is not specified, the filename defaults to sslcsr in your current directory.
The -f option is only supported on the remote interface(s).
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents