Dell PowerEdge M1000e Reference Manual page 82

cfgNicVLanID (Read or Write)
Specifies the VLAN ID for the network VLAN configuration. This property is only valid if cfgNicVLanEnable
Description
is set to 1(enabled).
1–4000 and 4021–4094
Legal Values
1
Default
racadm config -g cfgLanNetworking -o cfgNicVlanID
Example
1
cfgNicVLanPriority (Read or Write)
Specifies the VLAN Priority for the network VLAN configuration. This property is only valid if
Description
cfgNicVLanEnable is set to 1 (enabled).
0–7
Legal Values
0
Default
racadm config -g cfgLanNetworking -o
Example
cfgNicVLanPriority 7
cfgDNSDomainName (Read or Write)
In the DNS domain name, parameter is only valid if cfgDNSDomainNameFromDHCP is set to 0(FALSE).
Description
A string of up to 254 ASCII characters. At least one of the characters must be alphabetic. Characters are
Legal Values
restricted to alphanumeric, '-', and '.'.
Default <blank>
cfgDNSDomainNameFromDHCP (Read or Write)
Specifies that CMC DNS domain name must be assigned from the network DHCP server.
Description
• 1 — True
Legal Values
• 0 — False
0
Default
This property is used only if cfgNicUseDhcp is set to 1(true), or if both cfgIPv6Enable and cfgIPv6AutoConfig are set
to 1(true).
The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following properties are set to 1
(true):
•
cfgNicIPv4Enable
82
NOTE: Microsoft Active Directory only supports Fully Qualified Domain Names (FQDN) of 64 bytes
or fewer.