Dell PowerEdge M1000e Reference Manual page 100

cfgRacTuneHttpPort (Read or Write)
To use HTTP network communication, specify the port number.
Description
10–65535
Legal Values
80
Default
cfgRacTuneHttpsPort (Read or Write)
To use HTTPS network communication, specify the port number.
Description
10–65535
Legal Values
443
Default
cfgRacTuneIpRangeEnable (Read or Write)
Enables or disables the IPv4 Address Range validation feature.
Description
• 1 (TRUE)
Legal Values
• 0 (FALSE)
0
Default
cfgRacTuneIpRangeAddr (Read or Write)
Specifies the acceptable IPv4 address bit pattern in the positions of the "1"s in the range mask property
Description
(cfgRacTuneIpRangeMask).
Alogin from the incoming IP address is allowed only if the following are identical:
• cfgRacTuneIpRangeMask bit-wise and with incoming IP address
• cfgRacTuneIpRanbeMask bit-wise and with cfgRacTuneIpRangeAddr
An IPv4 address formatted string, for example, 192.168.0.
Legal Values
192.168.0
Default
cfgRacTuneIpRangeMask (Read or Write)
Standard IP mask values with left-justified bits. For example, 255.255.255.0.
Description
Login from the incoming IP address is allowed only if both of the following are identical:
• cfgRacTuneIpRangeMask bit-wise and with incoming IP address
100
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, and 60106.
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, and 60106.