Getmodinfo - Dell PowerEdge M1000e Reference Manual

Server-7-A 10 GbE KR
10 GbE KR/3
Switch-6 10 GbE KR

getmodinfo

Description Displays configuration and status information for all modules or a specified module (server, switch, CMC, fan
unit, power supply unit (PSU), KVM, or I2C cable) in the chassis.
A power state of "Primary" denotes Active CMC.
To run this subcommand, you must have the CMC Login User privilege.
racadm getmodinfo [-m <module>] [-A]
Synopsis
• -m <module> — Specifies the module whose configuration and status information you want to view. The
Input
default command (no options) displays information about all major components in the chassis.
<module> may be any of the following values:
– server-<n> where n=1–16
– server-<nx> where n=1–8; x = a, b, c, d
– switch-<n> where n=1–6
– cmc-<n> where n=1–2
– fan-<n> where n=1–9
– ps-<n> where n=1–6
– chassis
– kvm
– io-cable
– fpc-cable
• -A — Suppresses headers or labels in the output.
Examples
Display status of all the modules in the chassis
racadm getmodinfo
Display status of fan module 3 in the chassis
racadm getmodinfo -m fan-3
•
racadm getmodinfo -m switch-1
<module> <presence>
Switch-1 Present
•
racadm getmodinfo
<module> <presence>
Chassis Present
Present
Present
Present
NOTE: The Service tag field is blank for modules that do not have service tag.
<pwrState>
ON
<pwrState>
ON
00:90:FA: Disabled
51:34:F4
00:90:FA: Unknown
51:34:F5
N/A
00:00:00:00:00:
00
<health>
OK
<health>
Not OK
Factory
Factory
Factory
<svcTag> <nodeId>
0000000 N/A
<svcTag> <nodeId>
noble01 N/A
43