Cfgthermal; Cfgthermalmfspercent (Read Or Write); Cfgkvminfo - Dell PowerEdge M1000e Reference Manual

cfgChassisPowerCapBTU=56931 BTU/hr
cfgChassisPowerCapFBTU=56931 BTU/hr
cfgChassisPowerCapPercent =100%
cfgChassisPowerCapFPercent =100%
cfgChassisRedundancyPolicy=0
cfgChassisDynamicPSUEngagementEnable=0
# cfgChassisInMaxPowerCapacity=0 W
# cfgChassisInRedundancyReserve=0 W
# cfgChassisInPowerServerAllocation=0 W
# cfgChassisInfrastructureInPowerAllocation=51 W
# cfgChassisTotalInPowerAvailable=0 W
# cfgChassisStandbyInPowerCapacity=0 W
# cfgChassisPowerClear=******** (Write-Only)
# cfgChassisPowerClearTimestamp=18:00:00 12/31/1969
cfgChassisServerBasedPowerMgmtMode=0
cfgChassisPowerButtonEnable=1
cfgChassisAllow110VACOperation=0
cfgChassisMaxPowerConservationMode=0
cfgChassisPerformanceOverRedundancy=1
# cfgSystemEnergyConsumptionClear = ****(Write-Only)
cfgChassisServerBasedPowerMgmtMode=0
racadm config -g cfgChassisPower ‑o cfgChassisPowerClear 1
•
Clears cfgChassisMinPower and cfgChassisPeakPower.

cfgThermal

This group displays and configures the thermal settings. Use this object with the config or getconfig subcommands.
To set the configurations, you must have the Chassis Configuration Administrator privileges.

cfgThermalMFSPercent (Read or Write)

Configures the minimum fan speed in percent.
Description
0 to 100
Legal Values
0
Default
cfgThermalEnhancedCoolingMode (Read or Write)
Configures the enhanced cooling mode.
Description
• 1 — Enabled
Legal Values
• 0 — Disabled
Default 0 — Disabled

cfgKVMInfo

This group is used to display information for and configure the iKVM.
Use this object with the config or getconfig subcommands.
To use this object property, you must have Chassis Configuration Administrator privilege.
124