Cfgoobsnmp - Dell PowerEdge M1000e Reference Manual

cfgSerialConsoleIdleTimeout=1800
cfgSerialConsoleNoAuth=0
cfgSerialConsoleCommand=
cfgSerialConsoleColumns=0
cfgSerialHistorySize=8192
cfgSerialTelnetEnable=0
cfgSerialSshEnable=1
cfgSerialTelnetEnable (Read or Write)
Enables or disables the Telnet console interface.
Description
• 1 (TRUE)
Legal Values
• 0 (FALSE)
0
Default

cfgOobSnmp

This group contains parameters to configure the SNMP agent and trap capabilities of CMC. One instance of the group is allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2 and the Dell enterprise-specific the MIB.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable
object, use the —o option.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read or Write)
Specifies the SNMP Community Name used for SNMP traps. The community string acts as a password shared
Description
between different hosts over the network. This community string value must match with the other hosts for
any kind of communication through SNMP.
A string of up to 31 characters.
Legal Values
public
Default
Example
racadm getconfig -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpAgentCommunity=public
cfgOobSnmpAgentEnable (Read or Write)
Enables or disables the SNMP agent in CMC.
Description
• 1 (TRUE)
Legal Values
• 0 (FALSE)
0
Default
97