Maintenance and Inspection
Disposal
General Precautions
• The products shown in illustrations in this manual are sometimes shown without cov-
• The drawings presented in this manual are typical examples and may not match the
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa
xiv
• Do not disassemble the SERVOPACK.
Failure to observe this caution may result in electric shock or injury.
• Do not attempt to change wiring while the power is ON.
Failure to observe this caution may result in electric shock or injury.
• When replacing the SERVOPACK, resume operation only after copying the
previous SERVOPACK parameters to the new SERVOPACK.
Failure to observe this caution may result in damage to the product.
• Be sure to eliminate static electricity before operating buttons and switches
inside the front cover.
Failure to observe this caution may result in damage to the product.
• When disposing of the products, treat them as ordinary industrial waste.
Observe the following general precautions
to ensure safe application.
ers or protective guards. Always replace the cover or protective guard as specified
first, and then operate the products in accordance with the manual.
product you received.
representative or one of the offices listed on the back of this manual.
CAUTION
CAUTION