YASKAWA SGDV User Manual page 106

Step Display after operation
8
Alarm Display
An alarm is automatically displayed if a problem occurs for some reason. Check the
alarm using the user's manual for the corresponding SERVOPACK or command
option module (refer to
the appropriate measures.
Error Display
The following messages will be displayed if a communications error occurs between
the SERVOPACK and the digital operator due to a connection problem such as poor
connector contact. Check the connections and turn the power ON again. If the prob-
lem still persists, the digital operator or SERVOPACK must be replaced.
C P F 0 0
C O M − E R R ( O P & S V )
C P F 0 1
C O M − E R R ( O P & S V )
5.4 JOG Operation Using a Digital Operator
Keys
Manuals Related to the
Operation
Press the Key twice to return to
the initial display (step 1).
Σ
-V Series on page iv) and apply
(cont'd)
5
5-9