System Configuration Diagram; Connecting To Sgdv; Servopack (Analog Pulse Model); Servopack - YASKAWA SGDV User Manual

3.2

System Configuration Diagram

3.2.1

Connecting to SGDV-

Pulse Model)
SGDV-
Power supply
Single-phase 100 VAC
R T
Molded-case
circuit breaker
(MCCB)
Protects the power supply
line by shutting the
circuit OFF when
overcurrent is
detected.
Noise filter
Used to eliminate
external noise from
the power line.
Regenerative
resistor* 2
100 VAC
Brake power supply*
Used for a servomotor
with a brake.
Magnetic contactor
Turns the brake power supply
ON and OFF.
Install a surge absorber.
∗1.
Use a 24 VDC power supply. (not included)
∗2.
Before connecting an external regenerative resistor to the SERVOPACK, refer to 3.4 Con-
necting Regenerative Resistors.
F01A
SGDV-

SERVOPACK

Magnetic
contactor
Turns the servo
ON and OFF.
Install a surge
absorber.
1
SGMJV/SGMAV/SGMPS
Servomotor

3.2 System Configuration Diagram

01 SERVOPACK (Analog
F01A
Connection cable
for digital operator
Connection cable
for personal computer
I/O signal cable
Battery case
(when an absolute
encoder is used.)
Motor main
circuit cable
Digital
operator
Personal
computer
Host controller
When not using the safety
function, use the SERVOPACK
with the safety function jumper
connector (JZSP-CVH05-E,
provided as an accessory)
inserted.
When using the safety function,
insert a connection cable
specifically for the safety function.
Safety function
devices
Encoder cable
3
3-3