YASKAWA SGDV User Manual page 10

Storage and Transportation (cont'd)
Installation
x
• If disinfectants or insecticides must be used to treat packing materials such
as wooden frames, pallets, or plywood, the packing materials must be
treated before the product is packaged, and methods other than fumigation
must be used.
Example: Heat treatment, where materials are kiln-dried to a core
temperature of 56
If the electronic products, which include stand-alone products and products
installed in machines, are packed with fumigated wooden materials, the electrical
components may be greatly damaged by the gases or fumes resulting from the
fumigation process. In particular, disinfectants containing halogen, which includes
chlorine, fluorine, bromine, or iodine can contribute to the erosion of the capaci-
tors.
• Never use the product in an environment subject to water, corrosive gases,
inflammable gases, or combustibles.
Failure to observe this caution may result in electric shock or fire.
• Do not step on or place a heavy object on the product.
Failure to observe this caution may result in injury.
• Do not cover the inlet or outlet ports and prevent any foreign objects from
entering the product.
Failure to observe this caution may cause internal elements to deteriorate resulting
in malfunction or fire.
• Be sure to install the product in the correct direction.
Failure to observe this caution may result in malfunction.
• Provide the specified clearances between the SERVOPACK and the con-
trol panel or with other devices.
Failure to observe this caution may result in fire or malfunction.
• Do not apply any strong impact.
Failure to observe this caution may result in malfunction.
CAUTION
°
C for 30 minutes or more.
CAUTION