Determining Which Devices Use Dial Plan Tables - 3Com NBX 100 Installation Manual

Determining Which
Devices Use Dial Plan
Tables
You can route incoming calls to the auto attendant port, and you can
instruct the auto attendant to route these calls to any internal or external
number.
CAUTION: If you configure the auto attendant so that it can access
external numbers, you risk the possibility of toll fraud.
There are two types of routes: destination routes and timed routes .
Destination routes specify the extension of a destination device, and
I
can also perform digit manipulation operations on the dialed digits
that resulted in the selection of this route before those digits are
dialed on the destination device.
Timed routes specify a time of day and day of week criteria which,
I
when met, result in a particular destination route being selected.
CAUTION: If you operate the NBX 100 in Keyset Mode, routes are not
applicable.
You use the Devices Using button on the Dial Plan Tables tab to view lists
of devices and the tables they are using, and to add or remove devices
from table use. Figure 27 shows the fields in the Devices Using Tables
window.
Managing Dial Plan Tables 91