Setting Adjunct Access Button Mappings; Setting Adjunct Feature Button Mappings - 3Com NBX 100 Installation Manual

216 C 5: I
HAPTER NSTALLING
Setting Adjunct
Access Button
Mappings
Setting Adjunct
Feature Button
Mappings
T T
ELEPHONES AND ELEPHONE
Typically adjunct buttons provide an appearance for each extension in the
system and are mapped during the Auto Discovery process. However, you
can map an adjunct Access button to any of the functions listed in
Table 35.
To set adjunct Access Button mappings:
1 Open NetSet using the administrator username and password.
2 On the NetSet main menu, click the Device Configuration icon.
3 On the Device Configuration window, click the Adjunct tab.
4 In the Adjunct list on the DSS/BLF Adjunct window, select the device you
want to update, and then click Button Mappings.
To make sure you are choosing the correct device, you can match the
MAC address that appears in the list with the MAC address printed on
the label on the underside of the device.
5 Select the buttons you want to map by pressing the range and column
buttons.
6 Set the Type, Number, and Priority for each button.
To set adjunct Feature Button mappings:
1 Open NetSet using the administrator username and password.
2 In the NetSet main menu, click the Device Configuration icon.
3 On the Device Configuration window, click the Adjunct tab.
4 In the Adjunct list on the DSS/BLF Adjunct window, select the device you
want to update, and then click Feature Mappings.
To be sure you are choosing the correct device, you can match the MAC
address that appears in the list with the MAC address printed on the label
on the bottom of the device.
5 Use the drop-down lists to choose one of the functions for each button.
Table 35 describes the adjunct button types.
L
INES