3Com NBX 100 Installation Manual page 108

108 C 2: C D P
HAPTER ONFIGURING THE IAL LAN
TimedRouteEntry Create
Description:
Creates a timed route entry specifying either a time of day or system
mode, day of the week criteria, and the destination route to use if that
criteria are met. If the specified timed route entry already exists, this
command overwrites it with the new information. During routing, the
NBX 100 checks the list of timed route entries in ascending nEntryId order
( nEntryId 1 first). The NBX 100 performs any digit manipulation
operations that apply to the specified destination.
Syntax:
TimedRouteEntry Create nRouteId nEntryId szStartTime
szEndTime szDaysOfWeek nDestinationRouteId
Arguments:
nRouteId — An integer in the range 1 through 32768.
nEntryId — An integer in the range 1 through 32768. The NBX 100
checks the list of timed routes in ascending order based on nEntryId.
szStartTime — Start time in 24-hour format, for example, 13:30 for 1:30
pm. You can use either 24:00 or 00:00 to specify midnight. Instead of
specifying times, you can enter a system mode name (open, closed,
lunch, or other). For each system mode, the NBX 100 knows the start and
stop times. If you use one of the system modes, both szStartTime and
szEndTime parameter must be the same.
You define start and end times for system modes in NetSet. Click the
System Configuration icon, then the Business Identity tab, and the
Business Hours button. Enter the times you want and click OK.
You use the szDaysOfWeek parameter to specify when this timed route is
active. You can specify that the timed route entry apply to all days of the
week. If you specify the start and end times for open mode differently on
some days of the week than for other days, one timed route entry can
operate differently depending on the day.