Setting Timers - 3Com NBX 100 Installation Manual

Setting Timers

System timers enable you to set time-out periods for various NBX 100
features.
To set system timers:
1 On the System Settings tab (Figure 48), click Timers. The Timers window
appears (Figure 52).
Figure 52 Timers Window
2 Enter the settings you want. Table 33 describes each field.
3 Click OK. The System Configuration window displays the System Settings
tab.
Table 33 System Timers Fields
Field
Forward Voice Mail On
Timeout
Forward Voice Mail Off
Timeout
Configuring System-Level Settings
Purpose
When a telephone's FWD VMAIL button is enabled, sets
the duration of ringing before a call is forwarded to voice
mail.
Note: If you set this time to under six seconds, caller ID
information is not captured in voicemail.
When a telephone's FWD VMAIL button is disabled, sets
the duration of ringing before a call is forwarded to voice
mail.
181