Getting Started; Nbx 100 User Terminology; Required And Recommended Tools And Equipment - 3Com NBX 100 Installation Manual

130 C 3: I
HAPTER NSTALLING

Getting Started

NBX 100 User
Terminology
Required and
Recommended Tools
and Equipment
NBX 100 H C
ARDWARE OMPONENTS
Perform these tasks before installing the NBX 100 hardware:
Complete the system plan (see the NBX 100 Communications System
I
Planning Guide and "Preparing for Installation" in Chapter 1 for more
information.)
Prepare the Dial Plan (see Chapter 2 for complete information.)
I
Make sure that the external telephone lines are active and present at
I
the client's installation location
Gather the NBX 100 components at the installation location
I
Gather required and recommended tools and equipment
I
If there is not an existing 10BASE-T LAN, it must be installed or UTP
(unshielded twisted pair) wires must be in place between the NBX 100
chassis location and each telephone location.
For the purposes of installation, NBX 100 administrators, users, and
callers are defined as follows:
Table 15 NBX 100 User Classification
NBX 100 User
Administrator
User
Caller
Gather the following tools and equipment, which are typically required to
install the NBX 100.
Screwdrivers (flat and Phillips)
I
Pliers
I
Anti-static grounding strap
I
Recommended:
Punch down tool
I
Test set
I
Definition
A person with an administrator login to the NBX
100
A person with a user login to the NBX 100
A person calling in to the NBX 100