Configuring Speed Dial Numbers - 3Com 3102 Manual

82 C 9: S
HAPTER TANDARD
Configuring Speed
Dial Numbers
F
EATURES
Chapter 10 for information on accessing the VCX User Interface; see the
online Help for information on creating speed dials.
Note that the two interfaces are synchronized. A speed dial created or
modified in one interface appears in the other interface. A speed dial
deleted in one interface is deleted in the other interface.
Your administrator can configure speed dial numbers for your phone. You
can reassign these administrator configured speed dials unless the
administrator has optionally enabled BLF (busy light flashing) for a speed
dial. During speed dial configuration, the administrator can enable BLF
for the status light associated with the speed dial button. When the user
assigned to that speed dial button is on a call, the status light is lit. If the
administrator has enabled the BLF for a speed dial, you cannot reassign a
different number for that speed dial.
You set up speed dialing through the TUI using the Program button.
Refer to the chapter that describes the buttons and controls on your
phone for the location of the available speed dial Access buttons.
To configure a speed dial number using the Program button and the
Speed Dial menu:
1 Press the Program button (or press Feature + 410).
The Main menu appears.
2 Press [3] to access the Speed Dial menu.
The Display Panel lists the first speed dial:
Speed dial 1
If the speed dial is already configured, the Display Panels show the
configured number, for example:
Speed dial 1
1001
To locate the speed dial number you want to configure, press the
speed dial number (1 through 9) or use the up and down scroll
buttons
If you assign a number to a speed dial that does not have a
corresponding Access button, you can speed dial the number only by
entering the appropriate feature code.
:
: