Configuring Personal Speed Dial Numbers - 3Com VCX Manual

62 C 6: S
HAPTER TANDARD
Configuring Personal
Speed Dial Numbers
F
EATURES
This section describes how to set up speed dialing through the Telephone
User Interface. You can also enable speed dialing through the VCX User
Interface. See Chapter 7
Interface; see the online Help for information on creating speed dials.
Note that the two interfaces are synchronized. A speed dial created or
modified in one interface appears in the other interface. A speed dial
deleted in one interface is deleted in the other interface.
You set up speed dialing through the Telephone User Interface using the
Program button. Refer to the chapter that describes the buttons and
controls on your telephone for the location of the available speed dial
Access buttons.
To configure a speed dial number using the Program button and the
Speed Dial menu:
1 Press the Program button.
The Main menu appears.
2 Press [3] to access the Speed Dial menu.
The Display Panel lists the first speed dial:
Speed dial 1
If the speed dial is already configured, the Display Panels show the
configured number, for example:
Speed dial 1
1001
To locate the speed dial number you want to configure, press the
speed dial number (1 through 9) or use the up and down scroll
buttons
If you assign a number to a speed dial that does not have a
corresponding Access button, you can speed dial the number only by
entering the appropriate feature code.
3 Press the # button, then enter the number you want to associate with this
speed dial. Include all prefix numbers that you would normally dial, such
as a 9 or 8 or 1 to access an outside line, and, if necessary, the country
code or area code.
4 To store the number, press the # button.
for information on accessing the VCX User
:
: