Removing A Pretranslator; System Features Affected By The Dial Plan Configuration; Keyset Mode Operation Using The Dial Plan; Hybrid Mode Operation Using The Dial Plan - 3Com NBX 100 Installation Manual

100 C 2: C
HAPTER ONFIGURING THE
Removing a
Pretranslator
System Features
Affected by the Dial
Plan Configuration
Keyset Mode
Operation Using the
Dial Plan
Hybrid Mode
Operation Using the
Dial Plan

Offsite Notification

D P
IAL LAN
This section tells you how to remove a Pretranslator from the Dial Plan.
CAUTION: You cannot remove a Pretranslator if any device is currently
using it. If you want to remove the Pretranslator, you must first remove all
devices from the Devices Using Pretranslator list.
1 From the Dial Plan window (Figure 15), click the Pretranslators tab. The
Pretranslators window appears (Figure 29).
2 Select a Pretranslator from the scroll list.
3 Click Remove.
The Dial Plan configuration affects several system features. This section
describes how the Dial Plan configuration affects system features.
If you map any telephone buttons that have LEDs to specific Analog Line
Card ports or Digital Line Card ports, you enable Keyset mode in the NBX
100. Instead of dialing a single digit (typically 8, 9, or 0 (zero)) before
placing an outside call, the user presses a button to select an available
Line Card port. Even though you define the routing (that is, the selection
of a destination device) by pressing the button to select the Analog Line
Card port or Digital Line Card port, the NBX 100 controls the call using
the Dial Plan.
The NBX 100 applies any Class of Service restrictions associated with the
user's telephone to determine whether or not to make the call. Also, the
system uses any Pretranslator that a device uses, and performs any
required digit manipulation operations prior to actually transmitting the
digits on the Analog Line Card port or Digital Line Card port.
If you map telephone buttons for some telephones but not others, you
enable Hybrid mode (a mixture of standard and Keyset behaviors). The
NBX 100 provides a system-wide External Prefix setting which allows the
administrator to establish a prefix.
The NBX 100 uses offsite notification to notify a user when a new voice
mail message arrives. You define offsite notification devices, which must
be assigned to the Internal Dial Plan.