3Com NBX 100 Installation Manual page 225

To configure a telephone as the Attendant Console:
1 On the NetSet main menu, click the User Configuration icon. The Users
window appears (Figure 77). The list box shows the telephone extension,
the device name, and the user's first and last names for each user.
If you are adding a new telephone to the system, you can use the Auto
Discovery feature to configure the telephone.
2 Click Add. The Add User window appears (Figure 78).
3 Enter the following profile information about the Attendant Console
user:
An unused Extension number. The default Automated Attendant
I
forwards callers to extension 500 if the caller chooses the option to
speak to an operator. If you use a different extension for the
Attendant Console, be sure to update the Automated Attendant
system.
First Name and Last Name . You can make this profile a generic one,
I
such as "receptionist" or "attendant console", if many people share
the job. Title , Location , and Department can help you identify this
profile.
Class of Service and a Telephone Group . The NBX 100 includes an
I
Attendant Console group, which includes button mappings
appropriate for the Attendant Console function.
4 Enable the Fwd to Auto Attendant check box.
Fwd To Auto Attendant , when selected, diverts calls from the profile's
voice mailbox to the Automated Attendant.
5 Choose a device from the Telephone List .
The list shows all existing telephones. An asterisk identifies telephones
associated with a "new user" profile, a default profile assigned to
telephones during Auto Discovery. The extension you specified in the
Extension Number box replaces the default extension of the telephone you
choose.
6 Click OK to close the User Configuration dialog box.
Adding Users 225