Removing Regional Software And Components - 3Com NBX 100 Installation Manual

162 C 3: I
HAPTER NSTALLING
Removing Regional
Software and
Components
NBX 100 H C
ARDWARE
5 After selecting the Internationalization Pack, click Upgrade. This action
installs NBX 100 software, including the appropriate regional
components.
After installing the regional software and components, you still must
enable the language. That is, you must make the preferred language the
current language on the NBX 100. See "Enabling Regional Settings" on
page 178 for more information.
The administrator can use NetSet to remove regional language software
and components. All versions and components of the region are
removed.
1 On the Operations Regional Software tab, click the Remove button.
2 From the drop-down list, select the software that you want to remove.
Figure 42 Removing a Region
3 Click Remove.
4 Click Yes to confirm. This step removes all currently installed versions of
this regional software.
US English is installed by default and cannot be removed.
When you remove a region, all versions of that region are removed.
components associated with that region (except for U.S. English which
OMPONENTS