3Com NBX 100 Installation Manual page 195

To configure TAPI settings:
1 On the NetSet main menu, click the System Configuration icon. The
System Configuration window appears.
2 Click the TAPI Settings tab. The TAPI settings window appears (Figure 63).
Figure 63 TAPI Settings Window
3 Make changes as necessary to the Maximum TAPI Clients setting. (To
disable TAPI, set Maximum TAPI Clients to 0.)
4 Check Require Passwords for TAPI Clients if you want users to use a
password.
5 Click Apply to effect the changes.
Configuring TAPI Settings 195