Fresh Gravity Fill; Water Pump; Filling The Tank; Latching Controller - Monaco DIPLOMAT 2004 Owner's Manual

DIPLOMAT 2004

Fresh Gravity Fill

WATER PUMP

Inlet Screen.
Check every
3 months.
080374
6 • 248
The gravity fill inlet allows fluids to be introduced directly into the fresh
water tank. When dry camping water can be poured directly from a container
into the fresh water tank. The gravity fill inlet can be used to pour disinfecting
solution into the fresh water tank or when using potable RV antifreeze to win-
terize the fresh water system. Use only potable water sources, solutions and
delivery systems when using the gravity fill inlet.

Filling the Tank:

1. Unscrew fill cap taking care to keep cap and inlet clean.
2. Insert potable water hose into inlet.
3. Fill tank until water overflows from inlet.
040406
NOTE: When filling tank do not leave hose unattended.
The water pump pressurizes the fresh water system when not
connected to city water. The water pump is totally automatic and
self-priming, operating on demand as water is used. The water pump
is located in a storage compartment of the motorhome.

Latching Controller:

The circuitry of a latching controller allows multiple switch
locations to operate the water pump. Pressing one of the water
pump switches provides a momentary ground signal to the latching
controller, turning the water pump on or off from any location. An
indicator lamp at each water pump switch illuminates when the water
pump is on.
NOTE: The latching controller is located next to the
water pump.
The water pump can be operated from the following locations:
• Monitor Panel
WARNING: Before leaving the motorhome for
extended periods of time (i.e. overnight or longer)
be sure that the city water and all water pumps
have been turned off. Damage from neglect will be
the responsibility of the owner, not the
manufacturer.
• Bathroom • Service center
WATER SYSTEMS