Monaco 2008 Knight Owner's Manual

Monaco 2008 Knight Owner's Manual

Monaco 2008 knight motorhome owner's manual
Table of Contents

Advertisement

Quick Links

®
MONACO
MOTORHOME LIMITED WARRANTY
WHAT THE PERIOD OF COVERAGE IS:
This Limited Warranty provided by Monaco
components, assemblies and systems of your new motorhome not excluded under the
section "What is Not Covered" and when sold by an authorized dealer, for twelve (12)
months from the original retail purchase date or the first 24,000 miles of use, whichever
occurs first. However, this Limited Warranty provided by Warrantor covers the steel or
aluminum frame structure, only, of the sidewalls (excluding slide outs), roof, and rear
and front walls for sixty (60) months from the original retail purchase date or the first
50,000 miles of use, whichever occurs first.
If you use your motorhome for any rental, commercial or business purposes
whatsoever, the Limited Warranty provided by Warrantor covers your new motorhome
when sold by an authorized dealer for ninety (90) days from the original retail purchase
date or the first 24,000 miles of use, whichever occurs first. In addition, the Limited
Warranty provided by Warrantor covers the steel or aluminum frame structure, only, of
the sidewalls (excluding slide outs), roof, and rear and front walls for twelve (12) months
from the original retail purchase date or the first 24,000 miles of use, whichever occurs
first. A conclusive presumption that your motorhome has been used for commercial
and/or business purposes arises if you have filed a federal or state tax form claiming
any business tax benefit related to your ownership of the motorhome. The above
Limited Warranty coverage applies to all owners, including subsequent owners, of the
motorhome. However, a subsequent owner must submit a warranty transfer form by
filing the form through an authorized Monaco dealer. A subsequent owner's warranty
coverage period is the remaining balance of the warranty coverage period the prior owner
was entitled to under this Limited Warranty. Warranty transfer forms can be obtained by
contacting the Customer Relations Department. There is no charge for the transfer.
LIMITATION AND DISCLAIMER OF IMPLIED WARRANTIES:
IMPLIED WARRANTIES, IF ANY, ARISING BY WAY OF STATE LAW,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE TERM OF THIS
LIMITED WARRANTY AND ARE LIMITED IN SCOPE OF COVERAGE
TO THOSE PORTIONS OF THE MOTORHOME COVERED BY THIS
LIMITED WARRANTY. WARRANTOR DISCLAIMS ALL IMPLIED AND
EXPRESS WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, ON COMPONENTS AND APPLIANCES
EXCLUDED FROM COVERAGE AS SET FORTH BELOW. There is no warranty
of any nature made by Warrantor beyond that contained in this Limited Warranty. No
person has authority to enlarge, amend or modify this Limited Warranty. The dealer is
not the Warrantor's agent but is an independent entity. Warrantor is not responsible for
any undertaking, representation or warranty made by any dealer or other person beyond
those expressly set forth in this Limited Warranty. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
®
("Warrantor") covers those
WHAT THE WARRANTY COVERS:
Warrantor's Limited Warranty covers defects in the manufacture of your motorhome
and defects in materials used to manufacture your motorhome. "Defect" means the
failure of the motorhome and/or the materials used to assemble the motorhome to
conform to Warrantor's design and manufacturing specification and tolerances. Also
see the section "What the Warranty Does Not Cover" set out below.
WHAT WE WILL DO TO CORRECT PROBLEMS:
Warrantor's sole and exclusive obligation is to repair and/or replace, at its option, any
covered defect if: (1) you notify Warrantor or one of its authorized servicing dealers of
the defect within the warranty coverage period and within five (5) days of discovering
the defect; and (2) you deliver your Motorhome to Warrantor or Warrantor's authorized
servicing dealer at your cost and expense. It is reasonable to expect some service items
to occur during the warranty period. The performance of warranty repairs shall not
extend the original warranty coverage period. Further, any performance of repairs after
the warranty coverage period has expired or any performance of repairs to component
parts and appliances that are excluded from coverage shall be considered "good will"
repairs, which shall not alter the express terms of this limited warranty. If the repair
or replacement remedy fails to successfully cure a defect after Warrantor received a
reasonable opportunity to cure the defect(s), your sole and exclusive remedy shall be
limited to Warrantor paying you the cost of having an independent third party perform
repair(s) to the defect(s).
Warrantor may use new and/or remanufactured parts and/or components of
substantially equal quality to complete any repair.
Defects and/or damage to interior and exterior surfaces, trim, upholstery and other
appearance items may occur at the factory during manufacture, during delivery of
the motorhome to the selling dealer or on the selling dealer's lot. Normally, any such
defect or damage is detected and corrected at the factory or by the selling dealer during
the inspection process performed by the Warrantor and the selling dealer. If, however,
you discover any such defect or damage when you take delivery of the motorhome, you
must notify your dealer or Warrantor within five days of the date of purchase to have
repairs performed to the defect at no cost to you as provided by this Limited Warranty.
If either three or more unsuccessful repair attempts have been made to correct any
covered defect that you believe substantially impairs the value, use or safety of your
motorhome, or repairs to any covered defect(s) which you believe substantially impairs
the value, use or safety of your motorhome have taken 30 or more days to complete,
you must, to the extent permitted by law, notify Warrantor directly in writing of the
failure to successfully repair the defect(s) so that Warrantor can become directly
involved in exercising a final repair attempt for the purpose of performing a successful
repair to the identified defect(s).
MONACO LiMited WArrANty - 2008


Advertisement

Table of Contents
loading

Summary of Contents for Monaco 2008 Knight

  • Page 1 However, a subsequent owner must submit a warranty transfer form by filing the form through an authorized Monaco dealer. A subsequent owner’s warranty Warrantor may use new and/or remanufactured parts and/or components of substantially equal quality to complete any repair.
  • Page 2 MONACO LiMited WArrANty - 2008 HOW TO GET SERVICE: EVENTS DISCHARGING WARRANTOR FROM OBLIGATION UNDER WARRANTY: The “Acknowledgement of Receipt of Warranty/Production Information” form must be returned to Warrantor promptly upon purchase to assure proper part replacement Misuse or neglect, accidents, unauthorized alteration, failure to provide reasonable and repair of your motorhome.
  • Page 3 RoadmasteR Limited WaRRanty - 2008 ROADMASTER ® CHASSIS LIMITED WARRANTY WHAT THE WARRANTY COVERS: Warrantor’s Limited Warranty covers defects in the manufacture of the WHAT THE PERIOD OF COVERAGE IS: Roadmaster Chassis and defects in materials used to manufacture the Roadmaster Chassis.
  • Page 4 RoadmasteR Limited WaRRanty - 2008 HOW TO GET SERVICE: DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL DAMAGES: For warranty service simply contact one of Warrantor’s authorized service centers THE ORIGINAL PURCHASER OF THE ROADMASTER CHASSIS for an appointment, then deliver your Roadmaster Chassis (at your expense) to the AND ANY PERSON TO WHOM THE ROADMASTER CHASSIS IS service center.
  • Page 5: Table Of Contents

    2008 Knight Section 1 - general information ......3 Section 2 - Driving & Safety ........13 Section 3 - exterior & interior care ....49 Section 4 - applianceS ..........73 Section 5 - equipment ...........97 Section 6 - Water SyStemS ........125 Section 7 - lp-gaS SyStemS ........143 Section 8 - electrical SyStemS –...
  • Page 6 The motorhome manufacturer reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation. ©Copyright Monaco Coach Corporation. All rights reserved. All other trademarks or registered trademarks are property of their respective holders. Brand name products of other companies mentioned in this manual are not endorsed by the manufacturer of the motorhome.
  • Page 7: Section 1 - General Information

    2008 Knight general information — Section 1 Warranty InformatIon fIle ......4 reportIng Safety DefectS ......... 4 Safety termS ............4 gloSSary of termS ..........5 venDor lISt ............7 oWner’S manUal SUrvey: knIgHt 2008 ..11 lImIteD Warranty tranSfer applIcatIon/...
  • Page 8: Warranty Information File

    However, NHTSA cannot POISON: A warning or caution pertaining to safety become involved in individual problems between you, your dealer or Monaco Coach. To contact and/or use of a poisonous substance or Additional Information: harmful chemical. NHTSA you may call the Auto Safety Hot line...
  • Page 9: Glossary Of Terms

    General InformatIon — 1 City Water - A term associated with INFORMATION: Ampere (Amp) - The unit of measure of electron flow rate of current through a References to additional information the water supply that you hook-up to at circuit. campgrounds.
  • Page 10 General InformatIon — 1 Desiccant - A granular substance that has a Ohm’s Law - Expresses the relationship Escape (Egress) Window - The formal high affinity for water and is used to retain between Volt (E), amperes (I) in an name for the emergency window located in moisture from the air stream flowing through the rear of the motorhome.
  • Page 11 General InformatIon — 1 Roadside - This refers to the side of the motorhome which faces the road when it is parked. Often called the off-door side or the driver side. SCA - Term for Supplemental Coolant Additive. Chemical added to coolant for diesel engines to help prevent cylinder liner pitting and internal corrosion.
  • Page 13 4. Was the information within this manual helpful in acquainting you with your new recreational vehicle? If not please address any area(s) we need SERIAL # ____________________________________________________ tear off paGe and maIl to: to expand or improve on. ____________________________________________________________ TECHNICAL PUBLICATIONS PLT. 17 ____________________________________________________________ MONACO COACH CORPORATION ___________________________________________________________________ 91320 COBURG INDUSTRIAL WAY ___________________________________________________________________ COBURG, OR 97408 __________________________________________________________________...
  • Page 15 (New) Owner’s Signature Date Selling Dealer’s Signature (If Applicable) Date terms & representatons By your sgnature(s) on face sde of ths form, and n order to nduce 3. All information provided by you on face side of this form is true and correct. monaco coach corporaton to transfer ts lmted warranty, you represent 4. You understand that you are purchasing a pre-owned recreational vehicle the followng: and Monaco Coach Corporation does not make any representation as to its present condition. 1. That you have received and read a copy of the Limited Warranty. tear off paGe and maIl to: 2. You understand that the unit is to be used only for family camping and cross...
  • Page 17 2008 Knight Driving & Safety — Section 2 DrIvIng & Safety ..........14 WHeel moUntIng ..........35 WHeel moUntIng WHeel moUntIng .................... 3 Inspections............14 WeIgHIng tHe motorHome ......36 WeIgHIng tHe motorHome WeIgHIng tHe motorHome ............3 Familiarize.Yourself.
  • Page 18: Driving & Safety

    drIvInG & safety — 2 Examine the condition of the motorhome and DrIvIng & Safety Use the socket wrench to loosen the bolt  the surrounding area. Look high and low when located at the base of the arm. (See point walking around the motorhome.
  • Page 19 drIvInG & safety — 2 To fasten the seat belt, pull the belt out of the retractors and insert the tab into the buckle; a Child Safety Seat: click will sound when the tab locks into the General chld seat use Informaton buckle.
  • Page 20: Driving Tips

    drIvInG & safety — 2 The child safety seat can be positioned in two Replace the seat belt assembly after a severe The motorhome will travel safely and impact, even when damage is not obvious. comfortably at highway speed limits. However, places in the motorhome: the front passenger it takes more time to reach highway speed.
  • Page 21 drIvInG & safety — 2 As the turn approaches, look into the Check tonnage limits of bridges before Downgrade speed should be at least   crossing to ensure they can support the weight 5 mph less than upgrade speed, or mirror to ensure the lane to the left is of the motorhome.
  • Page 22 drIvInG & safety — 2 Fuel/Air mixture - At a given RPM, Winter and Cold Climate Conditions: Use the exhaust brake to help maintain a slow,  safe downhill speed. Located on the Driver Side the engine, even with the help of a The motorhome should be prepared for ...
  • Page 23: Trip Preparation

    drIvInG & safety — 2 Avoid running over the fuel hose as it can Avoid using full throttle when ascending Local, State and National Maps, as    a long hill. This wastes fuel and increases well as a ‘Motor Carrier’ road atlas (for get hung up on the motorhome and cause body damage.
  • Page 24: Hitch

    drIvInG & safety — 2 Evenly distribute and secure cargo. Store TIPS When weighing the motorhome, add all  passenger weight to the GCVW total. The Multi-purpose items, versatile clothing heavy items near the rear axle and lighter and periodic removal of unused cargo items toward the front to prevent uneven motorhome fully loaded, including fresh water, will streamline cargo storage.
  • Page 25 drIvInG & safety — 2 Pin to ball center should Components are classified into weight groups Safety Chains: not exceed 8". Ball mounts Safety chains are required by law when towing to help define weight capacity of towing any load. The chains and any fasteners used to equipment.
  • Page 26: Tow.plug.connection

    drIvInG & safety — 2 Taillight Configuration: communication while the camera is designed Taillights come in different configurations to provide the driver with a rear view when referred to as a 2-wire or 3-wire configuration. backing up. The rear camera is adjustable up and A 2-wire configuration has all red lens.
  • Page 27: Backing Up A Motorhome

    drIvInG & safety — 2 CA. SEL. - Press this button to manually one attempt. When the motorhome is properly The Voyager monitor is also used with the  (Optional) Aladdin system for displaying up- select desired camera (optional three aligned with the site, the parking area will be camera system).
  • Page 28: Set-Up Procedures

    drIvInG & safety — 2 4. Co-pilot holds arms horizontally, hands CAUTION If the desired direction is left, the co-pilot points left. For example: The co-pilot will open with palms facing one another. Tow bars or car dollies are generally use his/her right arm and forefinger pointing Start with a wide separation, gradually made to travel in a forward direction...
  • Page 29: Dry Camping

    drIvInG & safety — 2 Prepare the shore cord for connection. appliances current load prior to turning To conserve water and fuel:  Uncoil and inspect the cord. Perform Operate the refrigerator on LP-Gas. Plan on appliances or using interior outlets. ...
  • Page 30: Breaking Camp

    drIvInG & safety — 2 fresh water hose from the source. Store BreakIng camp Turn OFF interior 12 Volt DC power  whenever possible. Refrigerator, battery hose with end cap in place. If applicable, Preparing the motorhome for travel will charging and inverter operation will not remove the hose protection water be affected.
  • Page 31: Emergency Roadside Procedures

     locked. emerGency servIce provIder Check operation of all exterior lights, equpment provder emergency number  headlamp, taillamp, brake and clearance motorhome: 1-877-466-6226 Monaco Customer Support lights. Monaco Coach Secure all awning and travel locks. chasss: 1-877-466-6226  Roadmaster Roadmaster engne: 1-800-343-7357 Cummins Customer Assistance Center...
  • Page 32: In.case.of.flat.tire

    drIvInG & safety — 2 Next, start the generator. This may In Case of Flat Tire Battery Boost Switch:  require using the Battery Boost switch In the event of a flat tire, it for the generator to start from the engine battery.
  • Page 33: Towing Procedures

    drIvInG & safety — 2 and secures to the front axle. Inform the tow WARNING CAUTION Always ventilate the battery DO NOT use the towed vehicle for company of the axle weights and total weight of compartment prior to any work or jump-starting.
  • Page 34: Disabling.parking.brake

    drIvInG & safety — 2 Secure any loose or protruding parts if into hole. Turn clockwise to engage. WARNING  the motorhome is damaged. Screw nut and washer onto caging In case the motorhome requires towing,  ensure all precautions are followed. The tool.
  • Page 35: Importance.of.air.pressure

    drIvInG & safety — 2 Importance of Air Pressure Tire Pressure Inflation Guideline If one tire position on the axle is heavier than the other side, inflate both sides according to the heaviest side. This will provide correct air Federal law requires that the specifications The most important factor in maximizing the pressure across the axle while cornering.
  • Page 36: Tire.chart.-.Goodyear

    The motorhome manufacturer is not the author of this chart and makes no representation or warranty concerning the accuracy of the information disclosed by the chart. Monaco is not responsible for the accuracy of the information disclosed or for any errors within the Tire Inflation Chart.
  • Page 37: Inspecting.&.Pressure

    drIvInG & safety — 2 Understanding the Inflation Table: High fuel consumption. If there are extension hoses on the valve stem,  The tire size is on the left margin of the table. Reduced handling quality. make sure they are good quality reinforced ...
  • Page 38: Air.pressure.checklist

    drIvInG & safety — 2 Air Pressure Checklist Tire Support When Leveling Tire Vibration Sudden tire failure is often preceded by tire 1. When inspecting the tires, confirm Extreme caution must be taken to ensure the vibration. Symptoms that can cause tire failure the tires are cool before increasing or tires are fully supported when placing blocks reducing air pressure.
  • Page 39: Tire.rotation

    drIvInG & safety — 2 Tire Rotation WARNING Removal from Storage: In many instances tire life is not Before removing the motorhome from long- determined by mileage, but by age. Tires term storage thoroughly inspect each tire’s Tire rotation can increase the useful life of the are subject to weathering.
  • Page 40: Weighing The Motorhome

    drIvInG & safety — 2 WARNING check air wrench output and adjust line Capacity (CCC) and ensure no axle is pressure for the correct torque. overloaded. Never use wheels or lug nuts different than the original equipment as this could damage the wheel or the mounting WeIgHIng tHe motorHome The Gross Axle Weight Rating (GAWR) of system.
  • Page 41 drIvInG & safety — 2 The Federal Certification Label is a guide Unloaded Vehicle Weight (UVW): economy, poor handling and over-stressed  chassis components. How the motorhome is in knowing the maximum loaded axle weight Weight of this motorhome as built at loaded will influence tire inflation pressure and rating GAWR, and subsequently the correct factory with full fuel, engine oil and...
  • Page 42 drIvInG & safety — 2 Weight Label NOTE The most accurate method to determine proper tire pressure is to weigh each wheel position independently. Weighing the entire axle will not accurately determine the actual weight carried by each whell position. When weighing the drive axle dual position, divide the total weight by two to determine the weight carried by each tire.
  • Page 43: Four.corner.weighing.(Example)

    drIvInG & safety — 2 Four Corner Weighing (Example) NOTE Following scale readings and Gross Axle Weight Ratings are fictitious. Actual scale readings and Gross Axle Weight Ratings will vary with model and options. The motorhome must be weighed fully loaded to obtain accurate scale readings and to determine the proper tire pressure.
  • Page 44 drIvInG & safety — 2 GVWR from the Federal Weight Label, then A 10-gallon water heater with a 40-gallon Cargo Carrying Capacity: fresh tank would total 50 gallons times 8.3, or When weighing the motorhome it is important weighing the motorhome unloaded, without passengers and with a full fuel tank.
  • Page 45 drIvInG & safety — 2 Cargo Carrying Capacity Flowchart Cargo Carrying Capacity (CCC) is how much cargo the motorhome can carry. However, tongue weight of a towed vehicle will further reduce this amount. Now the motorhome can be fully loaded and weighed to ensure GVWR is not exceeded.
  • Page 46: Weighing.procedure.worksheet

    drIvInG & safety — 2 Weighing Procedure Worksheet example worksheet 020255b conv 20 0 8 K n I G ht...
  • Page 47: Weight.record.sheet

    drIvInG & safety — 2 Weight Record Sheet actual worksheet 020255b 20 0 8 K nI G ht...
  • Page 48: Smoke Detector

    drIvInG & safety — 2 Smoke Detector Maintenance Statistics show that most fire casualties are not Maintenance for Proper Operation: Test the smoke alarm once a week. caused by direct flame, but by less visible smoke  Keep a supply of 9 Volt DC batteries on (products of combustion).
  • Page 49: Carbon Monoxide Detector

    drIvInG & safety — 2 carBon monoxIDe Detector WARNING In cases of mild exposure, the symptoms may Constant beeping and a flashing red include: a slight headache, nausea, vomiting and fatigue. Some consider this a “Flu-like light means CO gas has been detected. American National Standards Institute (ANSI) Shut off appliances, motorhome Symptom.”...
  • Page 50: Alarm

    drIvInG & safety — 2 count to check that all persons are accounted for. One beep and one green flash indicate  Call the nearest fire department and ask them to memory is clear. determine the source of the Carbon Monoxide. Two beeps and two red flashes indicate ...
  • Page 51: Escape (Egress) Window

    drIvInG & safety — 2 eScape (egreSS) WInDoW Be sure to replace or recharge the extinguisher immediately after use. Inspect the fire extinguisher at least once a The Egress window, designated for use as month. Do so more frequently if the extinguisher an emergency exit, is identified inside of the is exposed to weather or possible tampering.
  • Page 52 drIvInG & safety — 2 otes 20 0 8 K n I G ht...
  • Page 53: Section 3 - Exterior & Interior Care

    2008 Knight exterior & interior care — Section 3 exterIor care ........... 52 SHoWer .............. 61 SHoWer SHoWer ..........................Corrosion............52 ceIlIng..............61 ceIlIng ceIlIng..........................Washing............52 Wall coverIngS ..........62 Wall coverIngS Wall coverIngS ..........
  • Page 54: Exterior Care

    exterIor & InterIor care — 3 Washing Drying NOTE “Section 3 - Exterior Care & Maintenance” is a general cleaning Periodic cleaning will help to preserve the Chamois cloths come in natural and synthetic section. Some of the articles within this paint finish.
  • Page 55: Paint.codes

    All special paint schemes require cleaning agents, lubricants and wax. Turn the cloth often. Use a separate clean cloth contacting Monaco Coach directly for paint codes. to buff. The surface should feel slick when Cleaning agents remove oxidation rubbing the cloth lightly over it.
  • Page 56: Bright.metal

    exterIor & InterIor care — 3 Polishes (unless marked “safe for clear WARNING NOTE  coat” or Alcoa Aluminum Care). DO NOT use a flammable solution to When using chemicals to remove road coat the inside of the rim. This can lead Synthetic cleaning pads, wire or abrasive tars, use only automotive products that ...
  • Page 57: Roof.care.&.Seal.inspections

    exterIor & InterIor care — 3 Roof Care & Seal Inspections for continued service. Sealant that is If health limits exposure to chemicals old, cracking, flaking or bubbling will or inhibits skills or abilities, employ a allow moisture intrusion and must be qualified service technician to perform Whenever there is something affixed to the repaired.
  • Page 58 exterIor & InterIor care — 3 glove. Keep rags or paper towels handy for clean General Maintenance – Roof Air Windshield Installation: Black Urethane up. Use care when applying silicone and plan Used for sealing the windshields, not to fill Conditioner: ahead before starting a bead.
  • Page 59: Interior Care

    exterIor & InterIor care — 3 Sealing Under a Painted Surface: Acrylic CAUTION To prevent overall soiling, frequently  DO NOT allow glass cleaners to come in Sealants: Geocel # 2300 vacuum or lightly brush to remove dust contact with the plastic. Glass cleaning and grime.
  • Page 60 exterIor & InterIor care — 3 NOTE Oil-Base Paint: Chewing Gum: Scrape off as much gum as possible using Detergents should never be used on a Use turpentine in a well ventilated area to regular or repeated basis for normal remove any fresh paint.
  • Page 61: Leather

    exterIor & InterIor care — 3 Ultra-Leather WARNING Vinyl requires periodic cleaning to Avoid open flames or hot lighting when maintain its appearance and to prevent using an alcohol solution. Care Instructions: the buildup of dirt and contaminants Spot clean with mild soap and water. ...
  • Page 62: Floors

    exterIor & InterIor care — 3 3. Periodically remove the tissues to check For solids, break up and vacuum out as E. Vinegar Solution: One cup white  on the condition of the stain. When the much as possible. vinegar to one cup water. Pretest the spot removal agent in an stain is almost gone, remove the tissues F.
  • Page 63: Tile.floor

    exterIor & InterIor care — 3 Tile Floor NOTE Before using any solution to clean Tile floors vary in porosity and surface the tile, check the manufacturer’s warning label to ensure safety of the irregularities. Regular maintenance is important product. If there is any doubt, apply to keep the tile in the motorhome looking several test patches of the solution in showroom new.
  • Page 64: Shower

    exterIor & InterIor care — 3 solvent-based or pigmented. Examples: nail Cleaning and Maintenance: Hardwood, Vinyl and Decorated Paneling: For everyday cleaning, vacuum the floor to Certain cleaning agents will affect the surface polish, oil, shampoo, lacquer, enamel, paint, ink remove dirt and debris.
  • Page 65: Wood Care

    exterIor & InterIor care — 3 Pencil: Nail Holes and Small Cracks: Minor damage to solid wood surfaces can be Erase as much of pencil mark as Fill nail holes and small cracks with wood repaired quickly and effectively with a bit of possible.
  • Page 66: Countertops

    exterIor & InterIor care — 3 coUntertopS Maple - Dilute one part iodine with one part CAUTION denatured alcohol. Solid Surface Use top coats and finishes in accordance with the manufacture’s safety instructions. Use only in well ventilated Routine Care: Commercial scratch removers, or stick wax to areas with proper respiratory filters and match the wood finish, can also be used.
  • Page 67: Laminate

    exterIor & InterIor care — 3 StaInleSS Steel SUrfaceS Controlling Moisture Condensation: Preventing Heat Damage: Hot pans and heat-generating appliances, such Reduce or eliminate interior moisture as frying pans or crockpots, can damage the condensation during cold weather by using the Clean stainless steel once a week with a damp surface.
  • Page 68: Window Treatments

    exterIor & InterIor care — 3 WInDoW treatmentS Day/Night Shades NOTE Mini-Blinds DO NOT use colored liquid soap as a stain may appear when fabric dries. Leave Day-Night shades in the up position Dusting: when not in use to help the shades hold their shape.
  • Page 69: Pest Control

    exterIor & InterIor care — 3 1. Carefully examine items for signs 6. Should mold develop, thoroughly Consequences of Mold: All mold is not necessarily harmful, but certain of mold before loading them in the clean the affected area with a mild motorhome.
  • Page 70 exterIor & InterIor care — 3 NOTE Common pests include insects such as Many pests need moisture to successfully   ants, cockroaches, termites, flies, pantry live and reproduce. Limit their access to Although the back cap of the motorhomes is well sealed, rodents are pests and wasps as well as wildlife such water or moisture sources by sealing any capable of chewing through the foam...
  • Page 71 exterIor & InterIor care — 3 Fruit flies invade the motorhome by attaching by completely cleaning the closet, dresser or of a professional to combat pest infestation, call to fresh fruits and vegetables. Determine what storage area. If cracks are detected, seal the a reputable business that is licensed in handling food items are generating the flies and discard pesticides.
  • Page 72: Storage

    exterIor & InterIor care — 3 Storage NOTE Careful placement of a small heat source  Short Term in the interior will help control moisture. The natural process of condensation Desiccate filter systems will help remove will occur with temperature changes of 30º...
  • Page 73 exterIor & InterIor care — 3 If AC power is available: Ultraviolet radiation affects soft goods Fuel:  Storing the motorhome with a full fuel tank The chassis battery disconnect switch should and rubber products such as privacy remain ON. The inverter will charge both house curtains, window shades and tires.
  • Page 74: Winter.storage.checklist

    exterIor & InterIor care — 3 Removal from Storage NOTE Engine: Add a small amount of antifreeze to Internal combustion engines need to be waste holding tanks to keep valves and Extensive freeze damage or other serious “exercised” on a regular basis to ensure an gaskets lubricated.
  • Page 75 exterIor & InterIor care — 3 While the engine is running, check the Install new batteries in battery operated Lubricate all the exterior locks, hinges    safety detectors or devices. Test the and latches with a graphite lubricant. operation of headlights, taillights, turn Carbon Monoxide, LP-Gas and smoke signals, back-up lights, license plate light...
  • Page 76 exterIor & InterIor care — 3 otes 20 0 8 K n I G ht...
  • Page 77: Section 4 - Appliances

    2008 Knight applianceS — Section 4 applIanceS - IntroDUctIon ......74 aIr conDItIonIng - roof ........86 aIr conDItIonIng - roof aIr conDItIonIng - roof ..............refrIgerator ............ 74 Operation............86 Operation Operation........................Operation.Specifics.......... 74 Heat.Pump.Operation........86 Heat.Pump.Operation Heat.Pump.Operation........
  • Page 78: Appliances - Introduction

    applIances —  applIanceS - IntroDUctIon refrIgerator Follow the specific guidelines in the This section covers operation and care of refrigerator manual to ensure longevity and various appliances found in the motorhome: proper operation of the refrigerator. With proper refrigerator, cooktop, microwave, roof air care and maintenance, the refrigerator should conditioner and optional appliances.
  • Page 79: Control.panel.-.Four.door

    applIances —  fgure c 030864d Automatic Mode (AU): LED Display: This feature selects AC over LP-Gas This screen is used for mode, temperature 040575 operation. If AC discontinues, the refrigerator and fault code display. Water Valve: Located under the will automatically switch to LP-Gas operation.
  • Page 80: Icemaker

    applIances —  Keep the doors shut. Know what you Pull the metal arm (bail) down to turn the Refrigerator Alarm   want before opening the doors. icemaker ON. Allow the refrigerator 24 hours of Push the arm up to turn the icemaker The refrigerator audible alarm will sound ...
  • Page 81: Doors

    applIances —  Doors Storage Procedures Bulb Replacement: 1. Remove the light cover by pulling it toward the front of the refrigerator. The refrigerator doors use a positive latch Storage Feature:  2. Remove the light bulb from the holder. that secures the door with a “click”...
  • Page 82: Exterior.refrigerator.access.panel

    applIances —  Exterior Refrigerator Access Panel To remove the air from the LP-Gas supply lines: LED Display – The screen displays  Ensure the primary LP-Gas valve and temperature, different modes of  any other necessary valves are open. NOTE operation, and status messages: Try lighting the cooktop burners first...
  • Page 83 applIances —  Automatic Defrost: Setting the Clock: Automatic Ice Dispenser: The ice dispenser 1. Press the SET button until figures flash on the freezer door conveniently dispenses ice. The refrigerator will automatically defrost on the LED display. Hours are on the the frozen and fresh food compartments every 24 To Operate: left and minutes to the right.
  • Page 84: Microwave/Convection Oven

    applIances —  A properly functioning microwave/ mIcroWave/convectIon oven NOTE If the bulb needs to be replaced use an convection oven presents no hazard with E14, 120V, 6-watt appliance bulb. ordinary use. Safety features should be kept The microwave/convection oven operates in good condition.
  • Page 85: Care.&.Cleaning

    applIances —  5. Replace louver and mounting screws. CAUTION CAUTION Long-term use of the inverter to Light cover may be hot. DO NOT operate the microwave while in transit touch glass with lamp ON. Never use will damage the alternator. Use the the light for prolonged periods, such as generator to operate the microwave a night light.
  • Page 86: Cooktop

    applIances —  cooktop Using the Cooktop: It is occasionally necessary to remove the  glass tray for cleaning. Wash the tray in 1. Place the cookware on the burner grate warm, sudsy water or in a dishwasher. over the desired surface burner. The cooktop The roller guide and oven cavity floor 2.
  • Page 87: Burner.grate

    applIances —  Burner Grate WARNING Porcelain Enamel: Sharp blows, radical surface temperature DO NOT leave burners unattended during cooking. DO NOT leave burner changes, etc., will cause enamel to chip or The two burner grates attached to the valve(s) open while burner(s) are not crack.
  • Page 88: Lighting.the.burners

    applIances —  DO NOT use the covers as a griddle. Burner Grate  Oven The covers must always be in place when  the motorhome is in transit. The two burner grates attached to the cooktop cover by four insertion tabs can be DO NOT use the oven with the covers in ...
  • Page 89: Wall Thermostat

    applIances —  Flame appearance may change and BTU Allow porcelain surfaces to cool before Wall tHermoStat   cleaning. Burns from the heated surface output will lower when operating the cooktop at an altitude above 5,000’. may occur or the cooktop porcelain can The comfort control thermostat controls Allow extra cooking time.
  • Page 90: Air Conditioning - Roof

    applIances —  Operation Heat Pump Operation Wall Thermostat Requirement for Operation: Heat Pump mode offers heat by using the air Ensure house batteries are charged. Operation Requirements:  conditioner as a heat source. The air conditioning Ensure house battery disconnect is on. 120 Volts AC, from either shore power or ...
  • Page 91: Air.conditioner.maintenance

    applIances —  fUrnace Return Air Filters Heat Pump Operation: Turn ON the battery cut-out  switch. Frequently clean the return air filters. The The furnace and its related components Slide the ON/OFF switch to filters are located inside the motorhome behind are 12 Volt DC operated, using LP-Gas as the ...
  • Page 92: Operation

    applIances —  Operation Using the Furnace If the Furnace Fails to Light Slide the ON/OFF switch to The furnace operates in the following If the furnace fails to light make sure the  manner. The wall thermostat sends a signal the ON position.
  • Page 93: Water Heater

    applIances —  Turn on the water pump or city water. Water Heater WARNING  IF YOU SMELL GAS extinguish all One at a time, open the hot and cold  open flame and turn off the primary valves of all faucets until a steady stream The water heater uses two different methods LP-Gas valve.
  • Page 94: Water Heater

    applIances —  water temperature in the tank exceeds 210° F Heating Water with LP-Gas: gas is turned off, the 120 Volt AC (98.8° C) or internal pressure exceeds 150 psi. Turn on the LP-Gas. source has been disconnected and ...
  • Page 95: Washer/Dryer Prepared (Optional)

    applIances —  A 120 Volt receptacle located in the Water Heater Compartment: NOTE  Periodically inspect the compartment. Be sure to refill the water heater with water before resuming operation. water heater compartment and NOTE door screen for foreign material that can prevent the flow of Troubleshooting: Sidewall dryer vents are not part of...
  • Page 96: Washer/Dryer (Optional)

    applIances —  WaSHer/Dryer (optIonal) CAUTION To Conduct the Test Procedure: 1. Set the selector knob to Reset. DO NOT use the washer/dryer while traveling. Suspension movement, 2. Set the Dry Timer knob to 30 minutes. The automatic combined with the weight of the drum Push the On/Off button to ON.
  • Page 97: Washer/Dryer.maintenance

    applIances —  11. Push the On/Off button to Out (OFF) Washer/Dryer Maintenance Winterizing the Washer/Dryer position. The Status light should be off. Occasionally wipe the exterior cabinet of Winterize Using Air Pressure: 12. If applicable, close the holding tank the washer/dryer with a damp cloth or sponge.
  • Page 98: Central Vacuum (Optional)

    applIances —  2. Rotate the bag cover counterclockwise central vacUUm (optIonal) Operation and remove cover. 3. With a finger on each side of the inlet, Ensure the bag Plug into shore power or slide the bag off the inlet tube. ...
  • Page 99: Operation

    applIances —  3. Locate the support (motor) filter in the fIreplace electrIc (optIonal - 40 SkQ other use not recommended by the only) manufacturer may cause fire, electric bottom of the bag compartment and lift out. shock or injury. 4.
  • Page 100: Remote.control/Receiver

    applIances —  Using the remote turn the fireplace ON/ To Open the Light Bulb Area:  OFF. Remove the trim by pulling straight  forward. Hold glass in place while removing NOTE  Depending on model fireplace, receiver retaining top clip. may already be installed.
  • Page 101: Section 5 - Equipment

    2008 Knight equipment — Section 5 eQUIpment - IntroDUctIon ......98 Sofa ............... 108 entertaInment ..........116 entertaInment entertaInment ..................entry Step............98 Easy.Bed.Sofa..........108 DaSH raDIo ........... 118 DaSH raDIo DaSH raDIo ...................... Operation............98 Hide-A-Bed.(Optional)......... 108 Speaker.Switch...........
  • Page 102: Equipment - Introduction

    equIpment —  2. Close the door. The step should retract A magnetic door eQUIpment - IntroDUctIon  and lock in the IN position. jam switch is used 3. Open the door. The step should extend to control step This section covers the basic operation and and lock in the OUT position.
  • Page 103: Grab Handle

    equIpment —  entry Door To operate the Stepwell Cover: With a box wrench or socket, loosen  1. Chassis Battery Disconnect must be on. the movable strike bolt. Make all 2. Press and hold the Step Cover switch to adjustments in small increments.
  • Page 104: Keyless Entry (Optional)

    equIpment —  Four Phillips type screws are on the top To Operate: CAUTION  Chassis battery disconnect must be ON. Never move the motorhome with any hinge and on the bottom hinge to adjust  the screen door for proper fit. The hinge slide room extended.
  • Page 105: Extending.&.Retracting.slide.rooms

    equIpment —  charged and operating. CAUTION CAUTION People, pets and objects must be clear of Firmly latch all cabinet doors adjacent Continuous operation of the slide room  to the slide before extending or the slide room path. can drain the batteries and overheat the retracting the rooms.
  • Page 106: Manual.override.-.Main.slide-Out.room

    equIpment —  4. Remove 12 Volt DC power from the If the slide room does not operate after It may be necessary to contact a repair  checking the safety requirements: facility to have the problem diagnosed slide-out motor by disconnecting the Examine all electrical connections at the and repaired.
  • Page 107: Manual.override.-.Bedroom

    equIpment —  5. Once the slide room is manually 5. Attach a socket and ratchet or drill Manual Override - Bedroom to the other end of the flexible shaft. retracted, apply pressure to the wrench to firmly set the room and prevent room reverse the direction.
  • Page 108: Front.door.-.Mirage

    equIpment —  Hook pull strap on side strap hook, NOTE To Operate:  Check for sufficient clearance When retracting the slide-out, stop the remove catch rod from pull strap and  before extending the awning. store. room approximately halfway. Confirm that the fabric is properly rolling before Chassis battery disconnect To Retract the Window Awning:...
  • Page 109: Awning.care.&.Cleaning

    equIpment —  Awning Care & Cleaning Leaks: External Control Switch: An external control switch is located at the It is normal for slight leakage to occur through bottom of the front outside arm. the fabric where water is allowed to accumulate. On a monthly basis, loosen hardened dirt If water drips through the needle holes in the and remove dust from the awning with a dry,...
  • Page 110: Fans

    equIpment —  fanS WARNING NOTE Automatic DO NOT hold switch after the motor DO NOT leave the fan switch in the has stopped. This may cause damage to active mode while the motorhome is the automatic lift system resulting in a stored or unattended for extended A wall thermostat controls the automatic vent stuck vent.
  • Page 111: Power Sunvisors

    equIpment —  poWer SUnvISorS pUll DoWn SHaDeS LUBE The pocket door rollers should be lubed with just a small drop of oil once a year The driver and passenger windows are To extend the sunvisor press to help increase the life of the rollers and equipped with a pull down shade to filter and hold the lower portion of improve sliding.
  • Page 112: Swivel Seats

    equIpment —  Sofa Hide-A-Bed (Optional) SWIvel SeatS Easy Bed Sofa The sofa hide-a-bed will convert easily into a The sofa converts easily into a bed. Clear the bed. Clear the area of obstruction and debris. Swivel Seat Operation: area of obstruction. To swivel, pull out on the swivel control ...
  • Page 113: Hide-A-Bed Air Mattress (Optional)

    equIpment —  After cap is removed, insert pump Sleeper to Sofa: Removing the Mattress Valve:  Remove all bedding from the hide-a-bed. Open deflation valve by lifting up on motor and turn clockwise until pump is   Grasp the foot of the hide-a-bed in the engaged.
  • Page 114: Free Standing Dinette (Optional)

    equIpment —  To Operate Air Mattress: Mattress Care: To Extend/Retract Table: The air mattress requires 120 Volt AC power The cover may be spot cleaned with To extend, pull out on table until it locks  from shore power or the generator to operate. carbonated water or mild detergent.
  • Page 115: Storage Under Bed

    equIpment —  Storage UnDer BeD Storage Bay SlIDe-oUt tray (optIonal) Tilt table up to release table from wall  bracket. Pull table out and push down lowering To use the storage compartment located under The storage bay slide-out tray is an option ...
  • Page 116: Citizen Band (Cb) Radio - Prep

    equIpment —  cItIzen BanD (cB) raDIo - prep NOTE Aladdin™ For information regarding subscriptions Controller: and service coverage areas, contact the A two pin connector labeled Citizens Band The controller allows appropriate provider for the system. the operator to control Radio is located behind the dash panel, along cursor movements.
  • Page 117: Aladdin.operations

    equIpment —  Aladdin Operations Voyager Monitor Coach Info To view Aladdin information screens, the rear The chassis battery disconnect switch must be Coach Info on. The Aladdin will function with the ignition view camera, or (optional) side cameras the displays current Voyager monitor must be ON.
  • Page 118: Trip.meter.selection

    equIpment —  tenth of an hour (six minutes). Trip Meter Selection System Options The Aladdin requests engine statistics Trip Meter periodically from the engine for use with trip System Options calculations. After such a change the next Selection provides provides a submenu for Aladdin functions trip information for...
  • Page 119: Power.down.aladdin

    equIpment —  Power Down Aladdin Television (Front) Lockout Feature TV Antenna The television (TV) antenna is a manual crank Turn off the ignition The ignition switch controls the outlet for the style antenna with built in electronics that use 12 to power down.
  • Page 120: Video.selector.box

    equIpment —  To Lower The NOTE Features Include: Push button controls allow sending Operation of the entertainment Antenna:  Pull down on the signals from any one of five different components is accurate at the  time of printing. Due to changes inputs to two televisions and VCR.
  • Page 121 equIpment —  Turn on TV. Use Input button to select Use volume control on DVD player to Use satellite remote control to select    MONO. select desired sound level. desired channel. Select desired channel on TV. For Home Theatre sound press Speaker ...
  • Page 122: Dash Radio

    equIpment —  Insert DVD into tray. Press Radio Power switch, located on the   To close tray push same tray button. dash, to On.  DVD will load and play automatically. Turn on the dash radio.  Turn TV on. Using Input button select Use MODE button to select AM or FM.
  • Page 123: Home Theatre Surround Sound

    equIpment —  SatellIte SyStem NOTE DSS Prewire For the bedroom dash radio switch to function the dash radio must be on. The motorhome is pre-wired with two (2) RG6 Infra-Red transmitter plugged in  031193e cables that route from the satellite prep plate Home tHeatre SUrroUnD SoUnD connections ROOF LNB #1 and ROOF LNB #2 Remote control must be...
  • Page 124: Satellite

    equIpment —  ROOF LNB #1: Hook-up to the roof satellite DVD V: DVD out to bedroom TV. Satellite Requirements dish. Run a coaxial cable from this connection to Satellite In. DVD L: Hook-up composite AV. The satellite system requires a clear view of the southern sky to receive signal.
  • Page 125: Maintenance

    equIpment —  exterIor entertaInment center “Instant On” Operation: Annually: As part of operation, the satellite routinely Have the satellite system inspected by a (optIonal)  saves its position to memory. When turned on, professional RV Technician or satellite the system looks at the last saved position. If installer.
  • Page 126: Systems Control Center

    equIpment —  8. Water Heater Switch - Applies 120 SyStemS control center Volt AC power to the Water Heater. The System Control Center enables a central 9. Slide-Out Room Controls - Extends location for many of the switches and control and retracts Slide Rooms.
  • Page 127 2008 Knight Water SyStemS — Section 6 Water SyStemS - IntroDUctIon ....126 toIlet ............... 135 toIlet toIlet ..........................13 Water tankS ........... 126 Cleaning.&.Maintenance......... 136 Cleaning.&.Maintenance Cleaning.&.Maintenance..............13 Measurements.&.Calibration......126...
  • Page 128: Water Systems - Introduction

    water systems —  Water SyStemS - IntroDUctIon WARNING The motorhome plumbing system can be Water is electrically conductive. DO attached to shore services (city water and sewer) at the roadside service center. The service center NOT use any electrically powered item This section contains or electrical outlet that may be exposed includes the city water/fresh tank fill connection...
  • Page 129: Fresh.water.fill

    water systems —  7. Turn on water at the water source. The systems when using the gravity fill inlet. Fresh Water Fill water should be audible as the fresh water tank fills. Observe tank fill by When connecting the motorhome to fresh Filling the Tank: 1.
  • Page 130: Power.water.hose.reel.(Optional)

    water systems —  5. Turn on the water at the source. Water pUmp CAUTION 6. The water pump can either be OFF or DO NOT continue water pump ON. It will not affect the water pump operation if the fresh water holding tank The water pump is empty.
  • Page 131: Water Filter - Faucet

    water systems —  Water pump is rapid cycling: Check for an open or grounded circuit or Check o-ring for damage and lubricate   motor. Look for restrictive water flow in the if necessary. O-ring should be changed  faucets or shower heads.
  • Page 132: Water Systems

    water systems —  Insert new cartridge into filter bowl. Turn the water pump ON. Open each Disinfecting Fresh Water   Screw filter bowl back onto head and faucet, in turn, and run the water until  hand tighten securely. you smell a distinct chlorine bleach odor.
  • Page 133: Faucet Screens

    water systems —  faUcet ScreenS Lift dispenser pump DO NOT dispose of table scraps or   out of bottle. cooking grease into the tanks. They can Use funnel to fill bottle Fresh water sources will vary by location. clog pipes or damage tremination valve ...
  • Page 134: Waste.drain.hose

    water systems —  Ensure that there is enough liquid in the Waste Drain Hose The solid waste drain (black water) valve holding tanks prior to dumping the waste remains closed until the tank is full or until time holding tanks to provide a smooth flow through A flexible three-inch of departure to help prevent clogging.
  • Page 135: Waste Pump (Optional)

    water systems —  When operating Sani-Con it is recommended WARNING Operating the flush system unattended to wear disposable gloves, safety glasses can risk flooding. Use the tank flush and protective clothing. The house battery system each time the holding tanks are disconnect switch, located in curbside battery cycled.
  • Page 136 water systems —  Periodically tighten all hose clamps. To Empty the Black Tank (Solid Waste): nozzle is installed correctly prior to  operation. Close the black tank (solid waste) and Install discharge nozzle to the sewer   grey tank (liquid waste) valves. connection (dump station).
  • Page 137: Toilet

    water systems —  toIlet Connect a non-potable water hose with  pressure regulator to the water source. Connect the other end of the water hose The toilet uses water from to the Tank Flush fitting. either the fresh water tank or Open the solid waste (black tank) valve.
  • Page 138: Cleaning.&.Maintenance

    water systems —  Between closet flange and toilet: To flush the toilet, push the lever all the electrIc toIlet   Confirm that flange screws are snug. (40 SkQ & 40 Dft moDelS only) way down until the sewage leaves the DO NOT over tighten screws.
  • Page 139: Programming.the.water.level

    water systems —  Press either button once to add water, run LED Sleep Mode: To save power  motor and return to normal use. consumption when not in use, an automatic LED sleep mode is programmed on this control panel. Programming the Water Level If the toilet is not used for 8 hours, the keypad’s LED lights will go out.
  • Page 140: Winterization

    water systems —  NOTE System Heat Operation: 1. Systems heat switch is Before storing the motorhome, the toilet must be flushed repeatedly to remove turned ON to apply power any solids that may have built up. to the snap disc thermostat. 2.
  • Page 141: Winterization

    water systems —  1. Empty and flush the holding tanks. 10. Leave open hot and cold water low- WInterIzatIon 2. Disconnect the water line connections point drain valves, fresh water tank low on either side of the water filter bowl point drain valve, and fresh water tank Water, plumbing and sewer systems require head.
  • Page 142: Using.non-Toxic.antifreeze

    water systems —  16. Hold toilet mechanism open until the Using Non-Toxic Antifreeze CAUTION water has stopped running. Some appliances such as washer/ 17. Shut off the air compressor and dryer and ice maker require special Approximately five to eight gallons of FDA winterizing instructions not covered disconnect the air hose.
  • Page 143: De-Winterization

    water systems —  14. Connect a hose 21. Turn water pump off. 9. If applicable, cycle ice maker several to the Fresh 22. Disconnect the power supply line times until fresh water is present and affecting water pump operation. reconnect valve outlet line.
  • Page 144: Water Service Center

    water systems —  1. Power Water Hose Reel Switch Water ServIce center (Optional) 2. City/Fresh Water Fill Connection 3. Water Pressure Regulator 4. Hose Faucet 5. Storage Light/Water Pump Switches 6. Sewage Tank Flush Fitting 7. City/Fresh Water Fill Handle 8.
  • Page 145 2008 Knight lp gaS SyStemS — Section 7 lp-gaS SyStemS ..........144 lp-gaS Detector ..........144 Testing............. 145 Alarm............... 145 Maintenance............ 146 lp-gaS emergency proceDUreS cHecklISt ........146 lp-gaS tank ............146 Measurement........... 146 Tank.Capacity..........
  • Page 146: Lp-Gas Systems

    lp Gas systems —  lp-gaS SyStemS WARNING accessory control valves. All fittings When storing portable LP-Gas tanks tested should be thoroughly rinsed and that are not connected to an LP-Gas dried after testing. Never attempt to This section contains safety information and system, install an approved plug in the adjust LP-Gas regulators.
  • Page 147: Testing

    lp Gas systems —  LP-Gas is heavier than air and will settle to for several months after the date of manufacture. CAUTION the lowest point in the motorhome. The LP-Gas The detector will not sound an alarm If it is determined that the detector has false during the three minute warm up cycle.
  • Page 148: Maintenance

    lp Gas systems —  2. Turn off primary 4. After two minutes the detector will valve on the return to normal operation (solid LP-Gas tank. green) or resound the alarm if 3. Determine dangerous levels of gas remain in the area.
  • Page 149: Tank.capacity

    lp Gas systems —  igniters to prevent a fire or explosion. Have a NOTE trained service person fill the LP-Gas tank. If the tank is new and being filled for the first time, inform the service technician to purge any air from the tank prior to WARNING filling.
  • Page 150: Lp-Gas Fundamentals

    lp Gas systems —  lp-gaS fUnDamentalS lp-gaS regUlator LP-Gas is compressed into liquid form in the tank. Only the vapor is used during combustion by an appliance. As vapor is removed from the tank, the remaining liquid will vaporize to maintain pressure that is removed during consumption.
  • Page 151 lp Gas systems —  Under normal atmospheric conditions an Damage to the regulator can occur when the LP-Gas regulator will not freeze, nor will the tank is overfilled. The regulator is designed Attach the manometer gauge to the LP-Gas. Vapor passing through the regulator to work with vapor only.
  • Page 152: Lp-Gas Hose Inspection

    lp Gas systems —  Slippage; evidenced by the misalignment lp-gaS HoSe InSpectIon  of the hose and coupling and/or the The hose manufacturer suggests that a scored or exposed area where slippage flexible LP-Gas supply hose undergo regular has occurred. inspection.
  • Page 153: Lp-Gas Safety Tips

    lp Gas systems —  LP-Gas appliances are rated in Input Divide the total of BTUs of the LP- The motorhome is equipped with many   BTU (British Thermal Units). The rating Gas tank by the total number of BTUs LP-Gas operated appliances because it is a convenient and efficient source of fuel.
  • Page 154 lp Gas systems —  Maintenance and Safety Tips for the LP-Gas Range: Burner flame should be a blue color,  which indicates complete combustion. If not, have the unit serviced by a qualified technician. DO NOT cover the oven bottom with ...
  • Page 155 2008 Trek elecTrical sysTems - house — secTion 8 HoUSe electrIcal - IntroDUctIon ....154 DIStrIBUtIon panel (50 amp) ......162 Battery DISconnect ........155 House.120/240.Volt.AC.Panel......162 House............155 Energy.Management.System......162 Battery cUt-oUt SWItcH ....... 155 Circuit.Breaker..........163 SHore poWer Hook-Up ........
  • Page 156: House Electrical - Introduction

    elecTrical sysTems - house — 8 appliances. Become familiar with these panels HoUSe electrIcal - IntroDUctIon WARNING and the items they operate. The electrical system is engineered and tested for safety. Circuit breakers With all the technological advancements taking This section contains guidelines, procedures and fuses protect the electrical circuits place in the past several years manufacturers and information that assist in understanding...
  • Page 157: Battery Disconnect

    elecTrical sysTem - house — 8 before performing electrical maintenance. If SHore poWer Hook-Up Generator: The generator can be selected for use when possible, leave the motorhome plugged into shore power is unavailable. The maximum an outside electrical service with the house The power requirement for the motorhome is 50 Amp amount of generator output power, measured in...
  • Page 158 elecTrical sysTems - house — 8 After the connection is made, turn the CAUTION The continuous amount of current   shore power breaker on. The transfer through a breaker or fuse is only 80% of DO NOT remove cover from shore power supply to troubleshoot electricity switch should make an audible click.
  • Page 159: Manual.cord.reel

    elecTrical sysTem - house — 8 Another common adapter is a 30 to 20 Amp WARNING In the event both shore and generator power adapter. This type of connector adapts the 30 Before working on the electrical system, are available, generator power will override Amp shore cord to a 20 Amp shore power outlet.
  • Page 160: Pre-Start.checks

    elecTrical sysTems - house — 8 Generator can be started from these WARNING When the motorhome is parked, locations: The generator remote switch on the dash. position the dash air conditioner  vent control in the OFF position The generator switch located on the ...
  • Page 161: Stopping.the.generator

    elecTrical sysTem - house — 8 Stopping the Generator Generator Fuel NOTE The generator may shut down when loaded nearly to full power and an Turn off the appliances There is always a possibility fuel may be air conditioner (or other large motor and disconnect other AC contaminated.
  • Page 162: Generator.exercise

    elecTrical sysTems - house — 8 Inverter If the circuit breaker immediately trips, the electrical distribution system has a short or Battery Charging with the Inverter the circuit breaker is faulty. Call a qualified The inverter changes DC battery power to electrician.
  • Page 163: Factory.default.settings

    elecTrical sysTem - house — 8 Factory Default Settings Shore Setting AC Power 50 Amp When hooked to 50 Amp Shore Service. NOTE The Inverter/Charger will charge 30 Amp When hooked to 30 Amp shore service. the batteries with AC power applied regardless of remote status. 20 Amp When hooked to 20 Amp shore service. Used when shore service is severely limited or functon default 10 Amp...
  • Page 164: Distribution Panel (50 Amp)

    elecTrical sysTems - house — 8 available for use. If the available power source DIStrIBUtIon panel (50 amp) Energy Management System House 120/240 Volt AC Panel is 120 Volt AC - 30 Amp shore power, the EMS attempts to keep the total 120 Volt current draw The Energy Management System is easily The AC distribution panels are located in a to less than 30 Amps.
  • Page 165: Circuit.breaker

    elecTrical sysTem - house — 8 Four service type LED’s indicate the source for If the current remains above the service limit, average running current for the system and, if it exceeds 80% of the service rating, the EMS 120/240 Volt AC power. Three of these sources the system will turn off the next load in the shedding table, again calculating the amount of sheds loads to reduce the average current below...
  • Page 166: Gfci.breakers.&.Outlets

    elecTrical sysTems - house — 8 power terminal through a person to the ground. WARNING When using outlets, care should be considered For example: touching a faulty appliance while If a breaker or outlet continually trips, when applying loads such as electric motors, DO NOT continue to reset breaker heaters, coffee makers, toasters, hair dryers or making contact with an electrical ground such as...
  • Page 167: Fuses

    elecTrical sysTem - house — 8 Shorting a battery cable to ground with a NOTE Tap water contains minerals which can battery at a reasonable state of charge can result in a fire or serious personal injury from a burn. alter battery chemistry and ruin the battery.
  • Page 168: Battery.maintenance

    elecTrical sysTems - house — 8 CAUTION Many types of petroleum based products or battery by-products can damage the paint finish. DO NOT allow these types of chemicals to get on the paint finish. If the chemicals splatter on to the painted surfaces, immediately rinse the surface using plenty of water and a mild detergent.
  • Page 169: Battery.charge.time.&.Consumption.rate

    elecTrical sysTem - house — 8 Checking the Electrolyte Solution WARNING If one cell in a particular The most efficient way of testing the batteries Sulfuric acid in the batteries can cause battery bank being tested is at is to check the electrolyte solution. The only a 50% state of charge while severe injury or death.
  • Page 170: Lights

    elecTrical sysTems - house — 8 current draw rating of 2 Amps, the inverter will lIgHtS The working range of a deep cycle battery is between 50 and 100% state of charge (SOC). use over 20 Amps DC power from the batteries. Incandescent Light Deep cycle batteries should not be cycled below 50% state of charge.
  • Page 171: Interior.halogen

    elecTrical sysTem - house — 8 6. Push bulb in and rotate to lock position. 6. Align contacts of bulb with terminals in NOTE 7. Gently squeeze lens cover and insert fixture base. Insert bulb until contacts Replacement tube number is accurate tabs on cover into fixture.
  • Page 172: Electrical Layout

    elecTrical sysTems - house — 8 electrIcal layoUt NOTE Representation of electrical system 060191v may vary with options and changes to motorhome. 20 0 8 k ni gh t...
  • Page 173 2008 Knight electrical SyStemS - chaSSiS — Section 9 cHaSSIS electrIcal - IntroDUctIon ..... 172 cHaSSIS electrIcal - IntroDUctIon cHaSSIS electrIcal - IntroDUctIon ......Battery DISconnect ........172 Battery DISconnect Battery DISconnect ................Chassis............172 Chassis Chassis........................
  • Page 174: Chassis Electrical - Introduction

    electrIcal systems - chassIs — 9 cHaSSIS electrIcal - IntroDUctIon WARNING the chassis battery through regular electrolyte level inspections and hydrometer readings. When welding is involved for motorhome repair or modification, High electrolyte consumption, or inconsistent This section contains guidelines, procedures only qualified, experienced technicians hydrometer cell readings, may indicate a and information that will assist in understanding...
  • Page 175: Section 9 - Electrical Systems – Chassis

    electrIcal systems - chassIs — 9 The fuses are standard plug-in type (ATM). When a fuse “BLOWS,” the wire in middle of the plastic case will be broken. A bad or blown fuse must be replaced with a fuse of the same rating and type.
  • Page 176 electrIcal systems - chassIs — 9 Front Distribution Box Label 080522f Rear Distribution Box Label 080522i Note: Fuse panel will change with options or changes to the motorhome. 080522d Front Distribution Box 080522 Rear Distribution Box 080522b 080522e Typical Rear Distribution Box Layout Typical Front Distribution Box Layout 20 0 8 K n I G ht...
  • Page 177: Battery Maintainer (Bi-Directional Isolator Relay Delay)

    electrIcal systems - chassIs — 9 Battery maIntaIner (BI-DIrectIonal Relays can look the same in appearance, but ISolator relay Delay) differ in function. Note that on the side of the relay is a schematic drawing identifying if the relay is 87 or 87a relay. These current ratings The Battery 080405b differ, and if mixed, will create problems.
  • Page 178: Alternator

    electrIcal systems - chassIs — 9 Alternator Testing Procedure The alternator replaces amp hours the chassis battery used to start the engine. The amount of charge the alternator sends to the chassis battery Alternator Testing: is dependent on the amount of time the engine Check all wiring for burnt or loose ...
  • Page 179: Steering Column

    electrIcal systems - chassIs — 9 conSole CAUTION Turn Signal Indicator and Headlight High/ The alternator is not a battery charger. Low Dimmer Control: The alternator is designed to maintain Both are located on the steering column. NOTE  proper electrical system voltage. A Push the lever forward to activate right Switch and component placement on ...
  • Page 180: Parking Brake

    electrIcal systems - chassIs — 9 Keypad Functions: WARNING DO NOT use economy mode while traveling Select the Reverse gear by pressing R. in mountain terrain. The lower RPM shift It is possible for the parking brake to be  RR will display.
  • Page 181: Dash

    electrIcal systems - chassIs — 9 DaSH 6. ODOMETER/TRIP METER: Instrument Panel Records the mileage driven as well as total mileage on a trip. 7. MILEAGE/TRIP RESET BUTTON: Used to toggle between the odometer, Trip 1, Trip 2 and the transmission temperature.
  • Page 182: Indicator.lights

    electrIcal systems - chassIs — 9 10. TRANS TEMP: Shows approximate temperature of the transmission fluid. DO NOT let the transmission cooler oil temperature exceed OEM specifications. If excess temperature is indicated, stop the motorhome and shift to neutral. Accelerate the engine at 1200 to 1500 RPM and allow temperature to return to normal.
  • Page 183: Switches

    electrIcal systems - chassIs — 9 13. ALT FAIL: Failure within the Switches CRUISE ON/OFF: Turns cruise ON or OFF. alternator charging system. CRUISE CANCEL: Signals the cruise system Dash switches come either 14. SEAT BELT WARNING: A warning with or without a bar light. to disengage without losing the current speed memory.
  • Page 184 electrIcal systems - chassIs — 9 AIR DUMP: Manually dumps all air out of WIPER/WASHER: Wiper ALADDIN CONTROLLER: air bags. May aid in leveling the motorhome. operations are controlled when The controller allows the rotating the knob to the right. Releasing air from air bags gives more range operater to control cursor of travel for leveling.
  • Page 185: Air Conditioner & Heater Controls

    electrIcal systems - chassIs — 9 RADIO: Turns on the radio. The dash radio PASSENGER CONSOLE PATIO AWNING ON/OFF: Turns power on ON/OFF switch must be on in order for this and off to the patio awning. STEP COVER: The sliding step well cover is switch to operate.
  • Page 186: Operating.tips.&.Hints

    electrIcal systems - chassIs — 9 Mode Control Switch: Directs air flow by MIX - Fresh air is drawn in and Operating Tips & Hints opening or closing damper doors. Use the Mode discharged through the floor and Control Switch to direct airflow where it is defrost louvers.
  • Page 187: System.components

    electrIcal systems - chassIs — 9 Heater: The heater warms the air in the dash The discharge air outlets should have Expansion Valve - The expansion  area. Much like the refrigeration side of the cold air. valve suppresses the refrigerant into system, a liquid will be used in the process.
  • Page 188: Troubleshooting

    electrIcal systems - chassIs — 9 Electrical Vacuum Vacuum Generator - The vacuum No Heating:  Air Conditioner 1. A/C switch is turned off. generator is important to the operation  of the dash heating and A/C systems. Heater 2. Blower switch is turned off. ...
  • Page 189: Diagnostic Plug Location

    electrIcal systems - chassIs — 9 6. Check for a pinch in the vacuum line alaDDIn™ engIne DISplay (optIonal) leading to the vacuum motor that operates the damper door in question. The Aladdin System will display engine and transmission statistics at DIagnoStIc plUg locatIon a quick glance.
  • Page 190: Engine "No Start" Flow Chart

    electrIcal systems - chassIs — 9 engIne “no Start” floW cHart 20 0 8 K n I G ht...
  • Page 191 2008 Knight chaSSiS information — Section 10 cHaSSIS - IntroDUctIon ......190 SteerIng gear..........205 SteerIng gear SteerIng gear.................... 20 fUel SyStem ..........222 fUel SyStem fUel SyStem ....................2 aIr SUpply SyStem ........190 DrIve axle & DrIve SHaft ......205 DrIve axle &...
  • Page 192: Chassis - Introduction

    chassIs InformatIon — 10 cHaSSIS - IntroDUctIon 4. Disconnect all the plugs from the mounts to the trailing links that are connected to the chassis. The raised rail design of main transmission Electronic Control Module located in the roadside front chassis offers increased bay storage space.
  • Page 193: Air.governor

    chassIs InformatIon — 10 Air Governor Air Storage Tanks The pneumatically operated items are divided Rear tank drain: located next to rear hitch into two categories: brakes and accessory air. Brakes have full use of supplied air pressure. The air Manually drain the Accessory air items, such as air horns, receive governor, located...
  • Page 194: Air.fittings

    chassIs InformatIon — 10 Pull hose away from fitting to expand WARNING  and set inner seal. Ensure hose is Wear safety glasses to prevent eye injury The air system on the motorhome can be from expelled moisture. Open drain properly retained in fitting.
  • Page 195 chassIs InformatIon — 10 2. Run engine until a chuff (air release) is This will test how long it takes the air system to achieve a specific pressure in a timed event heard from the air dryer. 4. Fan (apply/release in quick succession) when starting at a lower pressure.
  • Page 196: Air.coupler

    chassIs InformatIon — 10 RPM. Slide the locking collar back to release The steering wheel will not pull to the  fitting. left or right if front wheel braking torque is Test confirms that the park brake is engaged symmetrical. and holding.
  • Page 197: Desiccant.cartridge

    chassIs InformatIon — 10 NOTE The regeneration valve opens sending a small In extreme cold, verify that the air dryer heater is in good working order. The 100-watt If the seats are damaged so charge of dry system air from the front air tank back through the dryer.
  • Page 198: Desiccant-Type.air.dryer

    chassIs InformatIon — 10 aIr SprIng InSpectIonS replacement requIrements components when to replace? why? • • Items listed below should be checked when the Desiccant Cartridge Every two to three years. Preventive maintenance. • • motorhome is in for periodic maintenance. When compressor is Contaminated cartridge. • replaced. Saturated or contaminated •...
  • Page 199: Height Control Valves

    chassIs InformatIon — 10 purging air from the air springs as needed. Prepare for downhill grades. It may be necessary Make sure to check shock absorbers for  The air springs mount between the axle H- to select a lower gear and/or use the exhaust leaking hydraulic oil and worn or broken brake.
  • Page 200: Park.&.Emergency.brake.system

    chassIs InformatIon — 10 Park & Emergency Brake System NOTE indications are noticed, the brakes and When the park brake is released, the slack adjusters should be inspected by a Park illumination lamp will remain lit qualified brake technician. The Park and Emergency Brake System until air system pressure is above 65 psi.
  • Page 201: Abs/Atc System (Anti-Lock Brakes)

    chassIs InformatIon — 10 Another backup safety is the air system aBS/atc SyStem (antI-lock BrakeS) WARNING The ABS/ATC system is designed to separation of the front and rear brakes, implemented by using two air tanks. One tank increase tire to road surface traction but The motorhome is equipped with an anti- cannot overcome naturally occurring lock braking system (ABS) and automatic...
  • Page 202: Abs.diagnostic

    chassIs InformatIon — 10 System configuration check: ground 4 times. Braking force is applied at a level which Retrieving Codes Using ECU:  System configuration codes and fault codes are minimizes the stopping distance while displayed through the dash ABS warning light Dynamometer test mode: ground 5 times.
  • Page 203: Front Axle

    chassIs InformatIon — 10 ATC reacts to drive wheel slip by: ATC Indicator Light: heard on smooth surfaces while sharply turning Reducing engine torque to the drive During normal operation, the back and forth, the noise should be inspected  wheel if road speed is above 25 mph.
  • Page 204: Alignment

    chassIs InformatIon — 10 Alignment Incorrect toe settings, where toed-in or toed- “Negative” caster is the tilt of the top end of out, can have a significant affect on tire wear. the kingpin toward the front of the motorhome. Setting the caster angle more positive than The toe setting is adjusted by lengthening or Camber: shortening the cross tube.
  • Page 205: Lubrication.maintenance.safety

    chassIs InformatIon — 10 Lubrication Maintenance Safety Steering Components The front axle components require periodic lubrication maintenance. Chock wheels for safety prior to accessing components underneath the motorhome. WARNING Never place yourself under motorhome without first properly blocking frame (jackstands) from coming down in case of rapid deflation of air system.
  • Page 206: Drag.link

    chassIs InformatIon — 10 Steering Spindles WARNING NOTE Do not place yourself under motorhome Depending upon application universal without first properly blocking frame joints may have two grease fittings each. The steering (jackstands) from coming down in case It is necessary to apply grease to each Upper spindles attach to Lubrication...
  • Page 207: Front.brakes

    chassIs InformatIon — 10 Power steering is provided by using hydraulic All power from the engine to the rear tires is Front Brakes transferred through the rear axle. For this reason, pressure to assist rotating the output shaft of the steering gear. Located at the end of the it is important that maintenance be performed on The slack adjuster and input shaft of the steering gear is poppet valve...
  • Page 208 chassIs InformatIon — 10 7. Fill the axle with approved lubricant Proper Drive Axle Lubricant Level: NOTE It will be necessary to move the With the motorhome parked on a level until the level is even with the bottom  of the fill plug hole.
  • Page 209: U-Joint Angles Phasing & Driveline Balance

    chassIs InformatIon — 10 2. With finger, cover the rear air hole so U-Joint Angles Phasing & Driveline Balance The U-Joint working angle is the angle grease flows to the front seal. Apply the formed by the intersection of the driveshaft specified grease at the grease fitting on centerline and the extended centerline of the Correct U-joint working angles, U-joint...
  • Page 210: Shock Absorber

    chassIs InformatIon — 10 SHock aBSorBer levelIng - HyDraUlIc Remote: The remote control panel includes four switches that operate all the jacks, an Auto The shock absorber is a hydraulic The leveling system is designed to reduce sight switch, a MAN (manual) switch, a retract All device used to dampen suspension/ selection problems and stabilize the motorhome Jacks switch and a power ON/OFF switch.
  • Page 211: Prior.to.leveling

    chassIs InformatIon — 10 Prior to Leveling Manual Leveling CAUTION Ensure potential jack contact points are clear of obstruction or depression before Chassis battery voltage must be at least The manual leveling mode can be used for  operation. Keep all people clear of the 12 Volts DC.
  • Page 212: Automatic.leveling

    chassIs InformatIon — 10 Extend the jack position according to the Once the Jacks Down LED goes out, the NOTE   indicator lamp. Example: If the indicator jacks should be fully retracted. Make a A Jacks Down warning light will lamp is lit under Jack Extend Switch illuminate when the jacks are extended.
  • Page 213: Engine - General Information

    chassIs InformatIon — 10 Drive-away Protection: Adding Fluid: engine speed, increasing intake manifold vacuum. With the jacks extended and the park brake If the leveling system makes unusual noise or is released or transmission placed in gear, the alarm sounds when driving around corners or The diesel engine in the motorhome controls a warning alarm will sound and all LEDs over bumpy roads, this indicates a low fluid level.
  • Page 214: Starting Procedure

    chassIs InformatIon — 10 INFORMATION NOTE It is possible to operate diesel engines in The equipment owner and operator is DO NOT idle the engine for long periods extremely cold environments when the engine responsible for safe operation of engine. of time.
  • Page 215: Engine Oil

    chassIs InformatIon — 10 2. Always follow the recommended oil, engIne oIl CAUTION fuel, and coolant specifications as Upon cranking an engine in cold outlined in the OEM Engine Manual. temperature, the starter may rapidly Cummins Engine Requirements: engage and disengage. If this occurs Proper oil viscosity and coolant Maintenance guidelines and requirements STOP attempting to crank the engine...
  • Page 216: Engine Shutdown

    chassIs InformatIon — 10 Antifreeze that is not fully formulated must be engIne SHUtDoWn Oil additives should not be used unless the oil supplier or oil manufacturer has been mixed with clean, quality water (distilled water preferred) in a 50/50 ratio (40 to 60% working Allow the engine to idle three to five minutes consulted and provided positive evidence or range).
  • Page 217 chassIs InformatIon — 10 INFORMATION CAUTION Good-Quality Water: Good quality water is important for cooling Refer to the engine OEM manual for DO NOT remove the reservoir cap while system performance. Excessive levels of details on engine coolant maintenance. the engine is running or if the engine is hot.
  • Page 218: Radiator/Charge.air.cooler

    chassIs InformatIon — 10 Test kits are available from the engine operation continues and cause of the overheat end of service life include cracking or swelling manufacturer as well as aftermarket. Litmus condition is not immediately corrected. At this around clamps and connections. Oil leaks can paper is time and light sensitive.
  • Page 219: Rear Grill

    chassIs InformatIon — 10 thoroughly cleaned. Every 12 months: This process works well, however, the intake Inspect all hoses, clamps, and fittings for leaks air charge is heated two different ways: through During each oil change inspect the  engine side of the radiator/CAC convection by the exhaust gases driving the due to cracking, softness, and loose clamps/ turbocharger and when air is compressed.
  • Page 220: Exhaust Brake

    chassIs InformatIon — 10 when descending a hill or off ramp. When the exHaUSt Brake sensor, speed sensor, pressure switch and shift selector to provide optimum shift quality. This exhaust brake is activated the transmission is accomplished by matching transmission and automatically optimizes downshifts, utilizing the The exhaust brake (auxiliary engine RPM during a shift to establish a desired...
  • Page 221: Check.trans.indicator

    chassIs InformatIon — 10 downshifts from sixth to fifth when above 900. The display will flash “66” No display is an indicator of electrical problems with the engine batteries, ECU or the shift incurring a slight incline or overpass. indicating the engine RPM is excessive. selector.
  • Page 222: Periodic.inspections

    chassIs InformatIon — 10 Continued illumination of the CHECK center will have the equipment to check The codes will display one digit at a  TRANS light during vehicle operation (other time or two characters at a time on 4th diagnostic codes and correct problems than start up) indicates that the ECU has signaled that may arise.
  • Page 223: Transmission Fluid & Filters

    chassIs InformatIon — 10 Manufacturers) manual. Fluid and filters may Prevent Major Problems: Fluid Level Check from the Shift Selector: Help the control system oversee the operation require changing earlier than recommended in To Enter Oil Level Sense Mode: of the transmission. Minor problems can be kept the transmission OEM manual, depending on Park the motorhome on a level surface.
  • Page 224: Fuel System

    chassIs InformatIon — 10 Remove the dipstick and wipe clean. After wiping the dipstick clean, check “HI” represents an overfull condition    the fluid level. Safe operating level is followed by a numeric indication of the Reinsert the dipstick fully into the tube, number of quarts the sump is overfull.
  • Page 225: Fuel.tank

    chassIs InformatIon — 10 LSD (Low Sulfur Diesel) and ULSD (Ultra WARNING NOTE Low Sulfur Diesel): Beginning June 1, 2006, Use of LSD fuel in ULSD engines will Due to the precise tolerances of diesel 80% of available diesel fuel in the United damage emission control systems and is injection systems, it is extremely subject to fine.
  • Page 226: Fuel.sender

    chassIs InformatIon — 10 Connections: NOTE The bottom of the tank is made in a “V” configuration allowing the engine pick-up tube The adjustement must be made within The Centroid sender has four connections: access to almost all available fuel in the tank. thirty seconds of turning on power.
  • Page 227: Fuel.lines.&.Hoses

    chassIs InformatIon — 10 Fuel Lines & Hoses NOTE Close the drain valve by turning  clockwise when clear fuel is visible. It is recommended to wear gloves and old clothing when working with diesel Make a visual check for fuel leaks at all fuel.
  • Page 228: Hydraulic.filter

    chassIs InformatIon — 10 5. Check the fluid level on the “HOT” aIr Intake & cHarge aIr SyStem Filter assembly: Nelson 91085G side of the dipstick. It should be in the Filter number: 84365A (ten micron*) area of “HOT” on the dipstick. This is The air intake and charge air system supply the normal range for the dipstick.
  • Page 229: Changing.air.filter

    chassIs InformatIon — 10 Changing Air Filter Air Filter Restriction Indicator How To Reset Indicator: Push button on top to reset.  The air filter restriction indicator improves To replace air cleaner, engine efficiency by telling the amount of NOTE remove screws and If the air filter restriction indicator cover from air cleaner...
  • Page 230: Lubrication Maintenance

    chassIs InformatIon — 10 Stage Two: The DPF light flashes. The Active Regeneration: NOTE  An active regeneration cycle will be initiated DPF filter is clogged to the point that the If the engine is turned off during an active regeneration cycle, the cycle will engine will slightly derate (lose power).
  • Page 231 chassIs InformatIon — 10 NOTE working temperature and environmental The correct lubricant type with an approved specific rating must be used whenever applying, Maintenance schedules are based on exposure are just a few of the variables to normal operating conditions and use. consider.
  • Page 232 chassIs InformatIon — 10 Greasing: To apply grease: Thoroughly clean all Zerk grease fittings Clean the grease fitting. Initially operate  before applying new lubricant. Keep paper grease gun until new lubricant discharges towels or disposable rags handy when greasing. from nozzle, then wipe nozzle clean to When lubricating items such as drive shafts avoid introducing contaminants into the...
  • Page 233 chassIs InformatIon — 10 otes 2 00 8 K nI G h t...
  • Page 234: Lubrication Charts

    chassIs InformatIon — 10 lUBrIcatIon cHartS NOTE Front and rear chassis charts are representations. Actual location of equipment may vary. 070168d 070169n 20 0 8 K n I G ht...
  • Page 235 chassIs InformatIon — 10 NOTE Service must be performed every twelve (12) months, regardless of actual mileage, to protect seals, bearings and gaskets from drying out and failing. The motorhome must be started and driven for at least 20 miles every two weeks. It is important to remember the generator maintenance interval is based on hours of usage.
  • Page 236: Specifications Charts

    chassIs InformatIon — 10 SpecIfIcatIonS cHartS Engine Specifications Generator Specifications Tank Capacities 8 Kw Tank Capacities (Approx. Gallons) All Models enGIne specIfIcatIons Isc 30 hp 8.3 L/506 CI Cubic Inch Displacement Water Heater 10 gallons 360 HP @ 62 gallons Grey Water Engine HP 2000 RPM Black Water 40 gallons 1050 lbs./ft.
  • Page 237: Battery Specification Charts

    chassIs InformatIon — 10 Battery SpecIfIcatIon cHartS 2 00 8 K nI G h t...
  • Page 238: Maintenance.records

    chassIs InformatIon — 10 maIntenance recorDS After scheduled services are performed, record the date, odometer reading and who performed the service in the boxes provided after the maintenance interval. Any additional information from “Owner Checks and Services” or “Periodic Maintenance” can be added on the following record pages.
  • Page 239 chassIs InformatIon — 10 BATTERY RECORD SERVICE MAKE TYPE DATE INSTALLED REPAIRS DATE REPLACED MONTHS MILES TIRE RECORD SERVICE DATE DATE MAKE TYPE REPAIRS INSTALLED REPLACED MONTHS MILES 2 00 8 K nI G h t...
  • Page 240 InformatIon — 10 Technical PublicaTions manager: ILLuSTRATIONS: ONLINE TOuRS Vance Buell www.monaco-online.com/tours/ Kelly Stroble, Aaron Graham, Dustin Hutchcraft OPERATIONS PRINTING Knight 2008 ~ Technical Writer techncal wrters Holiday Graphics - IN Claudia Price William Birch - OR Knight 2008 ~ Layout Design Nate Bondurant - OR ONLINE Julie Karnes Thomas Joachim - IN Corporate Site: www.monaco-online.com Knight 2008...
  • Page 241: Index

    INDEX 2008 KNIGHT INDEX Aladdin™ System (Optional) ....112 Battery Cut-out Switch ......155 Aladdin Main Menu ........ 112 Battery Disconnect ........172 Chassis .............172 Aladdin Operations ......... 112 ABS/ATC System (Anti-lock Brakes) ..199 Coach Info ..........113 Battery Disconnect ........155 ABS Diagnostic ........200 House ............155...
  • Page 242 Index Chassis Electrical - Introduction .....172 Distribution Panel (50 Amp) ....162 Engine Shutdown ........214 Circuit Breaker ........163 Extended Engine Shutdown ....214 Citizen Band (CB) Radio - Prep ....111 Energy Management System ....162 Cold Weather Conditions ......138 Entertainment ........... 115 Cold Weather Storage ......138 GFCI Breakers &...
  • Page 243 Index Fuel System ..........222 Home Theatre Surround Sound ....118 Fuel Filters ..........225 Remote Control ........118 Fuel Lines & Hoses .........225 Speaker Switch ........118 Fabrics ............55 Fuel Requirements ........222 House Electrical - Introduction ....154 General Care & Cleaning ......55 Fuel Sender ..........224 Hydraulic System ........225 Leather ............57...
  • Page 244 Index Lights ............168 Microwave/Convection Oven .....80 Fluorescent Light ........169 Care & Cleaning ........81 Incandescent Light ........168 Mold & Mildew ...........64 Safety Terms ..........4 Interior Halogen ........169 Satellite ............120 Limited Warranty Transfer Application/ Maintenance ..........121 Change of Owner Information ....11 Satellite Requirements ......120 Liquid Soap Dispenser ......131 Semi-Automatic Non...
  • Page 245 Four Corner Weighing (Example) .....39 Wall Thermostat ..........85 Weighing Procedure Worksheet ....41 T,U,V Warranty Information File ......4 Weight Label ..........38 Warranty Limited: 2008 Monaco ....i Weight Record Sheet .........43 Tires ..............30 Warranty Limited: 2008 Roadmaster ..iii Weight Terms ..........36 Air Pressure Checklist .......34 Washer/Dryer (Optional) ......92...

Table of Contents