Manual Up/Down Tuning & Automatic Seek; Auto-Store Tuning (As) & Pre-Set Scan Tuning (Ps); Station Pre-Set Memories; Disc Slot - Monaco DIPLOMAT 2004 Owner's Manual

DIPLOMAT 2004
5 • 240
• MANUAL UP/DOWN TUNING & AUTOMATIC SEEK
TUNING (TUN) - Each time the right arrow button is tapped, the
radio will tune one frequency step higher. Similarly, each tap of the
left arrow button will tune one frequency step lower. To manually
tune in a station, tap the button of the appropriate direction until the
desired frequency is reached. Pressing either button for longer than
0.5 seconds and then releasing will activate the Automatic Seek
Tuning function. The radio will seek the next available station and
stop at the frequency. The Seek function can be stopped by pressing
the button again or activating any other tuning function.
• AUTO-STORE TUNING (AS) & PRE-SET SCAN TUNING (PS)
- During radio operation, press this button momentarily to scan the 6
stations pre-set into the memories of that band. The unit will stop at
each pre-set station for 5 seconds before continuing to the next
pre-set station. Press the button again momentarily to stop Pre-Set
Scan operation and remain on the selected frequency. Pressing the
button for longer than 2 seconds will activate the Auto-Store Tuning
feature which will automatically scan the band and enter up to 6
strong stations into the 6 pre-set memories.
• STATION PRE-SET MEMORIES - To set any of the 6 pre-set
memories in each band, use the following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/Down or
Automatic Seek Tuning controls.
3. Press the pre-set button to be set and continue to hold it in. After
approximately 2 seconds, the pre-set number will appear on the
display panel, indicating that the station is now set into that pre-set
memory position. The station can now be recalled at any time by
pressing that button.
4. Repeat the above procedure for the remaining 5 pre-sets on that
band and for the other 4 bands on the unit.
• DISC SLOT - With the label surface facing up, gently insert the disc
into the slot until the soft-loading mechanism engages and disc play
begins.
• TRACK SELECT (TRK) - These buttons are used to quickly select the
beginning of a particular track. With each momentary tap of the Forward
Track Select button (right arrows), the next higher track number will be
selected as shown on the display panel. Similarly, with each momentary tap
the Backward Track Select button (left arrows), the next lower track number
will be selected.
EQUIPMENT